🚀 go-pugleaf

In article <1986Oct16.110323.26016@utcs.uucp> wagner@utcs.UUCP (Michael Wagner) writes:
>Description:
>Cursor keys send wrong sequence when the keypad is in application mode
>
>Suggested Fix:
>in window.c, remove the checking for 'keyapp' in the cursor key code.
>always send the sequence currently in the 'else' logic.
>
>Reproduce-by:  
>trying to log on to a series/1 and using the cursor keys.  Series/1
>beeps at you (invalid key sequence).  (sorry, Series/1 has to be
>running the Yale/Ascii package...forgot that part).

We are also running the Yale package.  vt100 works fine.  Actually, I believe
Dave's code is correct.  If you look in the VT100 reference manual, you will
see that the cursor keys (up, for example) send <esc>[A when keypad is reset,
and <esc>OA when keypad is set.  This seems to be exactly what Dave's code
does.  If you would like, you can dial 609-452-6934.  This will connect you
to our broadband cable.  From there you enter "full" for the yale full-screen
package.  Of course, you can't log in, but you can verify that the cursor
control keys do work.
-- 
Kenneth Chiu                                              UUCP: princeton!chiu
Princeton University Computer Science Department        BITNET: 6031801@PUCC