🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: net.micro.amiga
Article #5320

Re: 220/110 Volt switching.

#5320
From: Kees Huyser
Date: Mon, 10 Nov 1986 22:52
41 lines
2609 bytes
In article <6302@ut-sally.UUCP> srinivas@ut-sally.UUCP (Srinivasan Sankaran) writes:
>I would like to buy an amiga, use it here for a while and take it to
>India where it is 220V/50Hz. Local dealers say I can't do that. 
>I can agree that I would have to buy a new monitor there. But does
>amiga not have a power supply switchable between 220(50hz)V and 
>110(60Hz) ? 
>
>Can somebody help me on this ?
>
>-thanks in advance.
>e-mail address :       srinivas@sally.utexas.edu

You could use a stepdown transformer to lower 220V/50Hz to 110V/50Hz.
I think most monitors will work on either 60 or 50 Hz, so that should
not be a problem.

+-----------------------------------------------------------------+
|  Kees Huyser							  |
|  Nationaal Instituut voor Kern Fysica en Hoge Energie Fysica    |
|  National Institute for Nuclear and High Energy Physics         |
|  PO Box 4395                                                    |
|  1009 AJ  Amsterdam, The Netherlands                            |
|								  |
|  UUCP : keeshu@nikhefk.UUCP                                     |
|         {[wherever]!seismo}!mcvax!keeshu@nikhefk.UUCP           |
|								  |
|  IF YOU BELIEVE DISCLAIMERS, YOU'LL BELIEVE ANYTHING!           |
+-----------------------------------------------------------------+

+-----------------------------------------------------------------+
|  Kees Huyser							  |
|  Nationaal Instituut voor Kern Fysica en Hoge Energie Fysica    |
|  National Institute for Nuclear and High Energy Physics         |
|  PO Box 4395                                                    |
|  1009 AJ  Amsterdam, The Netherlands                            |
|								  |
|  UUCP : keeshu@nikhefk.UUCP                                     |
|         {[wherever]!seismo}!mcvax!keeshu@nikhefk.UUCP           |
|								  |
|  IF YOU BELIEVE DISCLAIMERS, YOU'LL BELIEVE ANYTHING!           |
+-----------------------------------------------------------------+
Technical Details
Message-ID: <54@nikhefk.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!husc6!seismo!mcvax!nikhefk!keeshu
References: <6302@ut-sally.UUCP>

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!husc6!seismo!mcvax!nikhefk!keeshu
From: keeshu@nikhefk.uucp (Kees Huyser)
Newsgroups: net.micro.amiga
Subject: Re: 220/110 Volt switching.
Message-ID: <54@nikhefk.UUCP>
Date: Mon, 10-Nov-86 17:52:31 EST
Article-I.D.: nikhefk.54
Posted: Mon Nov 10 17:52:31 1986
Date-Received: Tue, 11-Nov-86 01:48:13 EST
References: <6302@ut-sally.UUCP>
Reply-To: keeshu@nikhefk.uucp (Kees Huyser)
Distribution: net
Organization: Nikhef-K CSG
Lines: 41
Keywords: 220V transformer 50/60Hz
Apparently-To: rnews@mcvax