🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: net.micro.amiga
2 messages
2 total messages Started by Rimas Blekaitis Fri, 07 Nov 1986 23:58
memory
#5297
Author: Rimas Blekaitis
Date: Fri, 07 Nov 1986 23:58
3 lines
832 bytes
of the Amiga and need good documentation on memory expansion. This would includeschematics, timing of the bus and the bus rate, the uses of the pins on 
the memory expansion slot, etc... Any good source (besides the Hardware Ref
Manual, which I have) recommended?
Re: memory
#5314
Author: George Robbins
Date: Sun, 09 Nov 1986 22:38
40 lines
2390 bytes
In article <4247@umcp-cs.UUCP> rimas@umcp-cs.UUCP (Rimas Blekaitis) writes:
>of the Amiga and need good documentation on memory expansion. This would includeschematics, timing of the bus and the bus rate, the uses of the pins on 
>the memory expansion slot, etc... Any good source (besides the Hardware Ref
>Manual, which I have) recommended?

The memory expansion connector on the front of the machine is essentially
limited to adding the other 256K of chip memory.  It has the signals needed
to do this much and no more.

The expansion connector on the side of the machine is much more flexible
(take that Atari!) and is documented in the Expansion Architure Document
availabe from Commodore.

---------------------------------------

SUPPORT SERVICES

Due to finite resources, we are forced to restrict some of our support 
services.  However, we are willing to provide a number of materials to
anyone.

Schematics and Expansion spec's  $20.00

To order, send a check payable to Commodore Business Machines to:

                   Bernadette Loughery
                   Software Tech Support  
                   Commodore Business Machines
                   1200 Wilson Drive
                   West Chester, PA 19380

Be sure to specify the name of the item you are ordering and include your
name and address.
               
These materials are provided as is.  In the past we have provided free 
upgrades; however, this is not a policy.
-- 
George Robbins - now working for,	uucp: {ihnp4|seismo|caip}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr@seismo.css.GOV
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads