Article View: net.micro.atari
Article #613Disk power
From: fisher
Date: Mon, 11 Mar 1985 22:05
Date: Mon, 11 Mar 1985 22:05
23 lines
1453 bytes
1453 bytes
Atari warns that the diskette should always be removed when powering the
1050 up and down. How important is this? Will it hurt the DRIVE if I
am willing to loose a diskette once in a while? (The fewer steps the kids
have to perform the better.) How about leaving the 1050 powered on all the
time? Any problem?
And finally (this is disk-related, so I'll put it in the same note): The
DOS-3 manual says that a specially formatted blank disk comes with the drive
to copy the master diskette onto. The formatting is alleged to allow the
drive to be faster than the formatting that the drive writes. Open the
drive box. No blank diskette. Call store. None of them have a blank.
What gives? Did they upgrade the drive formatting firmware, but not the
DOS manual?
Thanks for the info!
Burns
UUCP: ... {decvax|allegra|ucbvax}!decwrl!rhea!dvinci!fisher
ARPA: fisher%dvinci.dec@decwrl.ARPA
Technical Details
Message-ID:
<1057@decwrl.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!watmath!clyde!bonnie!akgua!mcnc!decvax!decwrl!dec-rhea!dec-dvinci!fisherShow Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.1 6/24/83; site decwrl.UUCP Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!bonnie!akgua!mcnc!decvax!decwrl!dec-rhea!dec-dvinci!fisher From: fisher@dvinci.DEC Newsgroups: net.micro.atari Subject: Disk power Message-ID: <1057@decwrl.UUCP> Date: Mon, 11-Mar-85 17:05:50 EST Article-I.D.: decwrl.1057 Posted: Mon Mar 11 17:05:50 1985 Date-Received: Fri, 15-Mar-85 02:19:17 EST Sender: daemon@decwrl.UUCP Organization: DEC Engineering Network Lines: 25