Re: Question: using two simultaneous displays

Article View: net.micro.atari

Article #690

#690

From: Chris Shaw
Date: Mon, 22 Apr 1985 07:51

11 lines
1120 bytes

Using two simultaneous displays may load your video driver too much, and cause
circuitry to burn. It is therefore not a good idea to run two monitors 
simultaneously, unless you can convince yourself that the maximum current
consumed by the monitors is less than the maximum current rating for video
output. The sum of the current maxima for each monitor should do nicely.

Note that we're not talking about information loss here, just potential 
electrical difficulties/damage.

Chris Shaw
University of Waterloo

Technical Details

Message-ID: <66@watmum.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!watnot!watmum!cdshaw

References: <1710@decwrl.UUCP> <990022@acf4.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site watmum.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!watnot!watmum!cdshaw
From: cdshaw@watmum.UUCP (Chris Shaw)
Newsgroups: net.micro.atari
Subject: Re: Question: using two simultaneous displays
Message-ID: <66@watmum.UUCP>
Date: Mon, 22-Apr-85 02:51:24 EST
Article-I.D.: watmum.66
Posted: Mon Apr 22 02:51:24 1985
Date-Received: Mon, 22-Apr-85 07:04:19 EST
References: <1710@decwrl.UUCP> <990022@acf4.UUCP>
Reply-To: cdshaw@watmum.UUCP (Chris Shaw)
Organization: U of Waterloo, Ontario
Lines: 11

Reply to Parent Message