🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: net.micro.atari
1 messages
1 total messages Started by Edmund S. Kijak, POINT Thu, 03 Oct 1985 12:48
Re: 800xl info request
#1140
Author: Edmund S. Kijak, POINT
Date: Thu, 03 Oct 1985 12:48
10 lines
1150 bytes

The four joystick ports are connected to two 6520 PIA (Peripheral Interface
Adaptor) chips.  Each bit of these ports can be set independently by software
to be either an output or an input, then can be written to or read from.
Specs for the 6520 can be gotten from Rockwell or Synertek.  Each joystick
port also contain pins for a pair of paddles.  These are variable resistors.
You can connect variable resistance sensors here and read them by software.
	Details are in the Atari Hardware Manual, or check old issues of
Byte and other mags (around 1982, 1983).
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads