🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: net.micro.atari
1 messages
1 total messages Started by Burns Fisher, MRO3-1/E13, DTN 23... Tue, 08 Oct 1985 14:13
A400 RAM upgrade
#1185
Author: Burns Fisher, MRO3-1/E13, DTN 23...
Date: Tue, 08 Oct 1985 14:13
31 lines
1835 bytes
<>
Bob Halloran asked about upgrading Atari 400 RAM to 64K.

I have not done this by replacing chips; I did buy a rather inexpensive
upgrade to 32K from someone on the net a few years ago.  I think he used
16K chips, but just added an extra bank of them and made the board very
dense.

In any case, though, I wonder if you have used the 400 very extensively?  If
not, you will find that if you are even a slightly reasonable typist, the
keyboard will drive you *>BATTY<* within minutes if not seconds!  This means
that you will need to buy a full stroke keyboard to make the 400 useful,
and these are getting harder to find.

I suspect that by the time you get a keyboard and buy the chips, you will
come pretty close to the now heavily discounted price of an 800XL, which has
already 64K and an OK (but not superior) keyboard.

I would keep the 400 for use in some future project as a burglar alarm 
controller (look at all those neat 4-bit I/O ports!) and get an 800XL or
even a 130XE (a bit more costly, but with 128K, I think).

Burns

P.S.  Oh, you say you just wanted to play with hardware?  Well, that's a 
different story.  Sounds like fun!


	UUCP:	... {decvax|allegra|ucbvax}!decwrl!rhea!dvinci!fisher

	ARPA:	fisher%dvinci.dec@decwrl.ARPA
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads