Thread View: net.micro.atari
4 messages
4 total messages
Started by Bob Burch
Thu, 10 Oct 1985 20:24
256K 800xl conversion
Author: Bob Burch
Date: Thu, 10 Oct 1985 20:24
Date: Thu, 10 Oct 1985 20:24
18 lines
1223 bytes
1223 bytes
Myself and others are interested in performing the modifications
specified in "The Quarter-Meg Atari 800XL" article as featured in
BYTE 9/85. We currently have the necessary parts on order and have
acquired the BYTEnet code.
In the interim, we are looking for any advice, tips, suggestions,
warnings, etc. from those of you having experienced these
modifications.
Among our questions are:
1) Does this mod actually work?
2) Will DOS 2.5 perform the proper bank switching?
3) Is there any applicable Public Domain software
available?
4) and lastly, HELP!!!
Your comments on this matter will be greatly appreciated!
Re: 256K 800xl conversion
Author: Vicious Oyster
Date: Fri, 11 Oct 1985 14:10
Date: Fri, 11 Oct 1985 14:10
47 lines
3070 bytes
3070 bytes
In article <427@imsvax.UUCP> bob@imsvax.UUCP (Bob Burch) writes:
>
> Myself and others are interested in performing the modifications
> specified in "The Quarter-Meg Atari 800XL" article as featured in
> BYTE 9/85. We currently have the necessary parts on order and have
> acquired the BYTEnet code.
...
> Among our questions are:
> 1) Does this mod actually work?
> 2) Will DOS 2.5 perform the proper bank switching?
> 3) Is there any applicable Public Domain software
> available?
> 4) and lastly, HELP!!!
The local Atari user's group Hardware SIG has two working 256K 800XLs.
I saw them demo'd at both the SIG and general meetings. They work;
however, I think they found that the Byte article wasn't 100% accurate,
but since they have the hardware knowledge, have done there own modifications,
and also have modified DOS 2.5 to work properly. The good news is that
we (the User's Group) have made both the circuit diagrams and the DOS
patches Public Domain. I'm not sure how you, as a member of the public,
would go about getting this information, but since I'm here on the net
and a member of the AUG, I'll take names of interested people and see what
I can do. (If you ARE a member of some Atari user's group, it might be easier
to ask your chairman or secretary or whatever to get ahold of my chairman or
secretary or whatever, and request the info. Here's the address:
Madison Area Atari Users Group (MAAUG)
Post Office Box 56191
Madison, WI 53705
Further news: they haven't yet made a 256K 1200XL, but they've opened one
up and said it can be done, but you also have to buy, um, it was either an
Antic or GTIA chip (I forgot which one; probably the former). Also, they
believe it's possible to cram an *extra* 256K into these machines. Yup!
That's 512K! And as the icing on the cake, our chairman, when last seen,
was mumbling something about "Directly accessing memory... forget about
ramdisks... piece o' cake..."
- joel "vo" plutchak
{allegra,ihnp4,seismo}!uwvax!uwmacc!oyster
Can you say "opinion"? I *knew* you could!
Disclaimer: the Academic Computing Center, the State of Wisconsin, and the
Madison Area Atari Users Group cannot be held responsible for anything I,
an employee and/or member of said organizations, say, post, or do.
Re: 256K 800xl conversion
Author: djk611
Date: Mon, 21 Oct 1985 19:57
Date: Mon, 21 Oct 1985 19:57
2 lines
714 bytes
714 bytes
yes the mod works...be careful when assembling the code
Re: 256K 800xl conversion
Author: dsaker
Date: Wed, 23 Oct 1985 14:52
Date: Wed, 23 Oct 1985 14:52
4 lines
651 bytes
651 bytes
I too want a copy of the answers. thanks Daryel Akerlind dsaker@iuvax
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads