Thread View: net.micro.atari
2 messages
2 total messages
Started by jallen
Tue, 04 Feb 1986 13:19
Monitor question for Atari 520ST
Author: jallen
Date: Tue, 04 Feb 1986 13:19
Date: Tue, 04 Feb 1986 13:19
16 lines
1110 bytes
1110 bytes
I have a Sanyo 9" composite video monitor and would like to buy an
Atari 520ST. Can anyone tell me if this monitor will work or do I
have to buy the Atari monitor? If it is just a problem of connectors,
I can fix that. This monitor has been used on IBM Pcs and an Apple ][.
Please mail replies to me. Thanks in advance.
-Jon Allen
USMAIL: Jon Allen
AT&T Communications
Room C50-52A58
30 Knightsbridge Road
Piscataway, New Jersey 08854
UUCP: {...}!ihnp4!acpy01!jallen
PHONE: 201-457-4178
Re: Monitor question for Atari 520ST
Author: jhs
Date: Thu, 06 Feb 1986 23:14
Date: Thu, 06 Feb 1986 23:14
22 lines
1771 bytes
1771 bytes
If it is a color monitor it should work just fine. If it is a monochrome monitor, you will probably have to re-tweak the vertical and horizontal hold controls to lock it in, and you may well have to make some changes to the sweep circuits both to lock it in and to get a full-sized picture with the right aspect ratio (horizontal to vertical scale factors). However, I hasten to add that I have never tried this and don't even own an ST (yet). The main problem is that the ST expects a monochrome monitor to run at a 70-Hz frame rate, non-interlaced, and to have 640 by 400 pixels. Standard monochrome monitors run at 60 Hz and I'm not sure of the screen resolution. The 400 should be no problem, as this is an "analog" quantity. But the number of lines is not, and there may be a problem of "folding over" of the picture. Also the geometry may not be right unless you change the gain of one of the sweep channels. If you think I sound like I know what I'm talking about, don't be fooled. Find somebody who really knows what monochrome monitors are all about. -John Sangster jhs at mitre-bedford.arpa
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads