Trak AT-D2 Printer Interface Problem

Thread View: net.micro.atari

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Gregory J. Wroclawski Tue, 02 Apr 1985 15:17

#659

Author: Gregory J. Wroclawski
Date: Tue, 02 Apr 1985 15:17

9 lines
1099 bytes

 I have an Atari 400 with 48K, a Trak AT-D2 disk drive with printer port
 and 4K buffer connected to an Epson MX-80 printer. The problem is when
 printing large files, large portions of the files are lost. It seems as 
 if the 4K buffer in the Trak gets filled the Atari does not stop sending
 data to the Trak. Small files, < 4K, print with no problem. I believe I have
 all the DIP switches in the Epson and on the back of the Trak set properly.
 Has anyone had a problem like this? I am hoping it is a setup problem not
 a problem with the printer interface in the Trak.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads