Article View: net.micro.atari16
Article #1255Re: 520 AND BLITTER (Getting chips out)
From: collinge
Date: Sun, 20 Jul 1986 04:00
Date: Sun, 20 Jul 1986 04:00
21 lines
1516 bytes
1516 bytes
In article <8607161601.AA21826@mitre-bedford.ARPA> jhs@disunix.UUCP.UUCP writes: >Shudder, horrors! You don't want to CUT THE PINS OFF the 68000, just >unsolder them carefully, remove it, and solder in the socket in its place. > ... >Another method that can be used is a "solder wick". The worry is that you damage your board. But solder wick works astonishingly well and very quickly, minimizing heat. I have found that, having done the solder wick thing and the pin is not quite clear, a GENTLE wiggle on the pin will almost invariably free it. Yes, the wick gets THAT MUCH solder. If not another treatment from the other side of the board usually does it. Doug. -- Doug Collinge School of Music, University of Victoria, PO Box 1700, Victoria, B.C., Canada, V8W 2Y2 decvax!nrl-css!uvicctr!collinge decvax!uw-beaver!uvicctr!collinge ubc-vision!uvicctr!collinge
Technical Details
Message-ID:
<177@uvicctr.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utcs!mnetor!seismo!nbires!hao!hplabs!tektronix!uw-beaver!ssc-vax!uvicctr!collingeReferences:
<8607161601.AA21826@mitre-bedford.ARPA>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!utcs!mnetor!seismo!nbires!hao!hplabs!tektronix!uw-beaver!ssc-vax!uvicctr!collinge From: collinge@uvicctr.UUCP Newsgroups: net.micro.atari16 Subject: Re: 520 AND BLITTER (Getting chips out) Message-ID: <177@uvicctr.UUCP> Date: Sun, 20-Jul-86 00:00:39 EDT Article-I.D.: uvicctr.177 Posted: Sun Jul 20 00:00:39 1986 Date-Received: Mon, 21-Jul-86 21:38:10 EDT References: <8607161601.AA21826@mitre-bedford.ARPA> Reply-To: collinge@uvicctr.UUCP (Doug Collinge) Organization: University of Victoria, Victoria B.C. Canada Lines: 21