Article View: net.micro.atari16
Article #1767Re: Analog RGB monitor
From: Bruce Wampler
Date: Wed, 10 Sep 1986 16:32
Date: Wed, 10 Sep 1986 16:32
10 lines
954 bytes
954 bytes
I used a SONY monitor with mine, don't have the model number right here, however. That particular model had a switch in the back for both TTL and analog levels. Apparently you can now get dealers to order the non-standard 13 pin connector, but I had to cut the cable for my monochrome and add an adaptor plug. I can now use the SONY on both my IBM and ST just by switching cables and changing from TTL to analog. No problems excpet no sound from the ST.
Technical Details
Message-ID:
<387@unmvax.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!seismo!cmcl2!lanl!unm-la!unmvax!wamplerReferences:
<20827@styx.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!cmcl2!lanl!unm-la!unmvax!wampler From: wampler@unmvax.UUCP (Bruce Wampler) Newsgroups: net.micro.atari16 Subject: Re: Analog RGB monitor Message-ID: <387@unmvax.UUCP> Date: Wed, 10-Sep-86 12:32:15 EDT Article-I.D.: unmvax.387 Posted: Wed Sep 10 12:32:15 1986 Date-Received: Thu, 11-Sep-86 18:40:41 EDT References: <20827@styx.UUCP> Organization: Univ. of New Mexico, Albuquerque Lines: 10