Re: Memory Upgrade Plea

Article View: net.micro.atari16

Article #1861

#1861

From: George Robbins
Date: Tue, 16 Sep 1986 17:41

16 lines
1460 bytes

In article <905@sunybcs.UUCP> leo@sunybcs.UUCP (Leo Wilson) writes:
>
>The problem is that my ST doesn't seem to recognize bank 1 as being there,
>though it does still boot & recognize bank 0 .  A little added info: I
>used Hitachi HM50256 chips & wire wound 68k resistors. My board is a rev. B
>board. (I should say "boards" as I also did the machine at work with
>an identical lack of results.)

68K?  K, who said K?  Off the top of my head, these resistors are more likely
to be 68 OHMS.  Any any case, wire-wound would be no advantage - ordinary
carbon composition or carbon-film is preferable for this sort of thing...

-- 
George Robbins - now working for,	uucp: {ihnp4|seismo|caip}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr@seismo.css.GOV
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)

Technical Details

Message-ID: <742@cbmvax.cbmvax.cbm.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!columbia!caip!sri-spam!parcvax!hplabs!sdcrdcf!burdvax!bpa!cbmvax!grr

References: <905@sunybcs.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!columbia!caip!sri-spam!parcvax!hplabs!sdcrdcf!burdvax!bpa!cbmvax!grr
From: grr@cbmvax.cbm.UUCP (George Robbins)
Newsgroups: net.micro.atari16
Subject: Re: Memory Upgrade Plea
Message-ID: <742@cbmvax.cbmvax.cbm.UUCP>
Date: Tue, 16-Sep-86 13:41:17 EDT
Article-I.D.: cbmvax.742
Posted: Tue Sep 16 13:41:17 1986
Date-Received: Sat, 20-Sep-86 00:08:40 EDT
References: <905@sunybcs.UUCP>
Reply-To: grr@cbmvax.UUCP (George Robbins)
Distribution: world
Organization: Commodore Technology, West Chester, PA
Lines: 16

Reply to Parent Message