Composite video output from ST

Article View: net.micro.atari16

Article #237

#237

From: John Purbrick
Date: Thu, 20 Mar 1986 20:06

12 lines
1415 bytes

The 1040ST, and now the 520ST, offer composite video output compatible with
normal monitors, or rf-modulated for TVs. There were a few questions here
a while back about how the ST reads its video memory to drive the display
without slowing down the processor (answer--video reads are done while the 
processor isn't using the bus, mostly) but now Atari has come out with an
additional video output, which can't be compatible with the "normal"
display drive as that is 70Hz, non-interlaced and regular monitors are
60Hz, interlaced. Does the new 60Hz display use the same technique as
before, using the bus alernately with the processor, so all three of them
are banging away? This makes it seem like there would be frequent bus-
contention, especially between the 60Hz and 70Hz accesses. Is there some
kind of magic that makes this less of a problem?

Technical Details

Message-ID: <2587@mit-hermes.ARPA>

Path:

arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!allegra!princeton!orsvax1!pyrnj!caip!seismo!ll-xn!mit-amt!mit-eddie!mit-hermes!jpexg

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!allegra!princeton!orsvax1!pyrnj!caip!seismo!ll-xn!mit-amt!mit-eddie!mit-hermes!jpexg
From: jpexg@mit-hermes.ARPA (John Purbrick)
Newsgroups: net.micro.atari16
Subject: Composite video output from ST
Message-ID: <2587@mit-hermes.ARPA>
Date: Thu, 20-Mar-86 15:06:13 EST
Article-I.D.: mit-herm.2587
Posted: Thu Mar 20 15:06:13 1986
Date-Received: Sat, 22-Mar-86 23:20:53 EST
Distribution: net
Organization: The MIT AI Lab, Cambridge, MA
Lines: 12