How to get Special Characters from 1ST Word with Panasonic 1091

Article View: net.micro.atari16

Article #2442

#2442

From: Eric Terrell
Date: Sat, 18 Oct 1986 06:42

16 lines
1086 bytes

I've finally figured out how to get most of the special characters in the
1ST Word font table printed out by a Panasonic 1091 printer.

First, turn off the printer.  Remove the clear plastic cover above the 
dip switches.  Flip dip switch #2 to the off position.  Replace the cover.

Then install the pana1091.hex printer driver.  I'll post this next.

Now you should be able to print out just about every character in the font
table (no Hebrew).

Hope this is useful,


Eric Bergman-Terrell

Technical Details

Message-ID: <8610180642.AA06687@ohio-state.ARPA>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!caip!rutgers!nike!ucbcad!ucbvax!OHIO-STATE.ARPA!terrell

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!caip!rutgers!nike!ucbcad!ucbvax!OHIO-STATE.ARPA!terrell
From: terrell@OHIO-STATE.ARPA (Eric Terrell)
Newsgroups: net.micro.atari16
Subject: How to get Special Characters from 1ST Word with Panasonic 1091
Message-ID: <8610180642.AA06687@ohio-state.ARPA>
Date: Sat, 18-Oct-86 02:42:48 EDT
Article-I.D.: ohio-sta.8610180642.AA06687
Posted: Sat Oct 18 02:42:48 1986
Date-Received: Tue, 21-Oct-86 20:37:45 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 16