Article View: net.micro.atari16
Article #691Followup to ST Power Supply Problems
From: Jan Gray
Date: Wed, 14 May 1986 12:59
Date: Wed, 14 May 1986 12:59
19 lines
1388 bytes
1388 bytes
Well, the simple solution was to order a replacement power supply, which is only $40CDN. I opened up my old power supply to take a look at the problem, and I was *not* impressed. About 2/5 of the supply consists of a large transformer in a sea of wax. The main PC board was held into place by a foam rubber "stopper". The problem -- two of the large diodes (part of a bridge rectifier) had exploded, leaving diode bits and a blackened PC board. I was very lucky it didn't take the ST with it... I have a feeling quality control consists of "plug it in, if it works, ship it". Those of you with the old style power supplies might do well to buy one of the newer supplies (disclaimer -- I haven't been inside one of the new ones -- it might be just as bad), since they're only a small fraction of the price of your ST system. Jan Gray
Technical Details
Message-ID:
<989@watdragon.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!watmath!watnot!watdragon!jsgrayShow Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84; site watdragon.UUCP Path: arc1-ca.pugleaf.net!utzoo!watmath!watnot!watdragon!jsgray From: jsgray@watdragon.UUCP (Jan Gray) Newsgroups: net.micro.atari16 Subject: Followup to ST Power Supply Problems Message-ID: <989@watdragon.UUCP> Date: Wed, 14-May-86 08:59:10 EDT Article-I.D.: watdrago.989 Posted: Wed May 14 08:59:10 1986 Date-Received: Thu, 15-May-86 19:00:21 EDT Distribution: net Organization: U of Waterloo, Ontario Lines: 19