Article View: net.micro.att
Article #1114Re: 3b2 lost characters - solution.
From: L.EICHNER
Date: Thu, 18 Sep 1986 19:23
Date: Thu, 18 Sep 1986 19:23
16 lines
1066 bytes
1066 bytes
On page 2-2 of the WECO port board manual it says: " Each card will support simultaneous output to four serial ports at 9600 baud * with line occupancy less than 80% ... or *TWO* ports at 9600 at 100% or *FOUR* ports at 4800 at 100% ... " There is no mention of compounded problems with more than one port card, but this might be a factor as well.. "If you don't want to read the instructions yourself, you should at least pay someone to do it for you..."
Technical Details
Message-ID:
<1638@homxc.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!seismo!columbia!caip!clyde!cbatt!ihnp4!houxm!homxc!le2262References:
<193@osi3b2.UUCP> <548@chinet.UUCP> <680@hropus.UUCP>, <686@hropus.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!columbia!caip!clyde!cbatt!ihnp4!houxm!homxc!le2262 From: le2262@homxc.UUCP (L.EICHNER) Newsgroups: net.micro.att,net.bugs.usg Subject: Re: 3b2 lost characters - solution. Message-ID: <1638@homxc.UUCP> Date: Thu, 18-Sep-86 15:23:51 EDT Article-I.D.: homxc.1638 Posted: Thu Sep 18 15:23:51 1986 Date-Received: Fri, 19-Sep-86 23:58:00 EDT References: <193@osi3b2.UUCP> <548@chinet.UUCP> <680@hropus.UUCP>, <686@hropus.UUCP> Organization: AT&T Bell Labs, Holmdel NJ Lines: 18