Re: PC6300+ question (re MS-DOS compatibility)

Article View: net.micro.att

Article #1149

#1149

From: w.ortel
Date: Mon, 25 Aug 1986 18:43

20 lines
1598 bytes

> We're running three 6300's at our installation (MsDos - yecch).  I've heard
> (real) rumors that these machines can be upgraded to 6300+'s.  Has anyone
> out there done so?  Also, how much MsDos compatibility is retained?  I run a
> CAD system that does a lot of nasty screen hacks, and the main reason to
> upgrade is for increased processing power for this application, but if I can't
> just copy files around to do the port, there is no sense in spending bucks on
> hardware, unix or no.  Any solid info on the + will be much appreciated.
> Tanks advance...                       \scott


Even though your application is non-standard, since it runs on
a PC 6300 it will very likely run on a PC 6300 PLUS that is
used as an MS-DOS-only machine.  If it runs, its performance
will certainly be better on the PLUS.  It is possible that it will
also run on the PLUS under Simul-Task.  In either case, you 
really need to test it to make sure.

Bill Ortel
AT&T, Lincroft NJ (201)576-3242 (mtuxo!wcgo)
Product Management, PC 6300 PLUS

Technical Details

Message-ID: <1926@mtuxo.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!columbia!caip!clyde!cbatt!cbosgd!ihnp4!houxm!mtuxo!wcgo

References: <138@csustan.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!columbia!caip!clyde!cbatt!cbosgd!ihnp4!houxm!mtuxo!wcgo
From: wcgo@mtuxo.UUCP (w.ortel)
Newsgroups: net.micro.att
Subject: Re: PC6300+ question (re MS-DOS compatibility)
Message-ID: <1926@mtuxo.UUCP>
Date: Mon, 25-Aug-86 14:43:11 EDT
Article-I.D.: mtuxo.1926
Posted: Mon Aug 25 14:43:11 1986
Date-Received: Tue, 26-Aug-86 04:57:34 EDT
References: <138@csustan.UUCP>
Distribution: na
Organization: AT&T Information Systems Labs, Holmdel NJ
Lines: 20

Reply to Parent Message