Helllllp!!! 6300+ Simul-Task/UNIX and Mountain 30MB Hardcard

Article View: net.micro.att

Article #1159

#1159

From: kufeldt
Date: Sat, 30 Aug 1986 03:37

22 lines
1495 bytes

Our department purchased a 6300+ on which we are currently running
UNIX and DOS applications under Simul-Task.  The system was originally
running MSDOS when we installed a second hard drive (Mountain Card 30MB).
This configuration worked fine with no problems.

The problem is, as I understand it, that under UNIX the system looks at
the ROM on the Mother-board to determine the hard-disk configuration for
the system.  Because of this I do not have any way of accessing the
Mountain Card via UNIX.  I might add the Mountain Card has its own
controller, and I can not use it to control my internal 20MB drive.

Has anyone had a simular problem, and if so, is there an answer?
I would like to be able to use both hard-disks partitioned
80% UNIX 20% DOS.  Right now my only access to the Mountain Card
is to Boot DOS from drive a: and change to "d:".

Ed Kufeldt
AT&T Network Systems
Lisle,Ill.

Voice: (312)510-2516

Technical Details

Message-ID: <553@iham1.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!lll-crg!caip!clyde!burl!ulysses!mhuxr!mhuxt!houxm!ihnp4!iham1!ejk47

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!lll-crg!caip!clyde!burl!ulysses!mhuxr!mhuxt!houxm!ihnp4!iham1!ejk47
From: ejk47@iham1.UUCP (kufeldt)
Newsgroups: net.micro.att
Subject: Helllllp!!!  6300+ Simul-Task/UNIX and Mountain 30MB Hardcard
Message-ID: <553@iham1.UUCP>
Date: Fri, 29-Aug-86 23:37:23 EDT
Article-I.D.: iham1.553
Posted: Fri Aug 29 23:37:23 1986
Date-Received: Sat, 30-Aug-86 10:14:29 EDT
Organization: AT&T Bell Labs, Naperville, IL
Lines: 22
Keywords: 6300+, UNIX, Mountain 30MB Hardcard