Disctron drives on Adaptec?

Thread View: net.micro.cpm

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Bruce H. McIntosh Tue, 28 Oct 1986 11:56

#5400

Author: Bruce H. McIntosh
Date: Tue, 28 Oct 1986 11:56

12 lines
1284 bytes

I have a pair of old Disctron hard disks, a DP400 (40mb fixed) and a
DP100 (10mb removable) that I want to hook up to my CP/M machine (an
H89 with a SCSI port added to it).  These drives are real antiques:
8" platters, 28 hard sectors of 256 bytes each (if memory serves).
Currently, they're controlled by an equally off-the-wall DTC controller
board (built especially for these drives).  I've talked to the supplier
of my SCSI port, and he says that the software he's developed for it
will only work properly with an Adaptec or Xebec or equivalent SCSI
drive controller.  My question:  will the Adaptec or the Xebec control
these mostrosities?  Or am I faced with the task of developing my own
code for the oddball DTC controller?  Thanks in advance for any advice
and info!

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads