🚀 go-pugleaf

In article <331@PSUECL> kjg@psuecl.BITNET writes:
>
>     Does anyone know how to cheaply convert a hp 82905b printer with only
>the 002 (the hp protocal port option) so that i can use the centronics port.
>I now have about three machines in my office but only one printer.  I like
>this printer but need to have it work on my other centronic machines.  I can
>handle any electronic modifications myself and the printer is no longer under
>warranty.
>
>
>thanks
>
>     
 I was only able to use the Centronics port on my 82905B after removing the
 HPIB board from the printer.  It seems that the HPIB board's output is tied 
 directly to the input of the Centronics port and that the HPIB board is really
 no more than a HPIB to Centronics converter.  Anyways, the data and handshaking lines on the Centronics port end up looking like OUTPUTS rather than the inputs one would expect when one sees this connector on the back of their printer.  
 In fact, one might even be able to use their 82905B printer as a HPIB to
 Centronics converter by hooking another Centronics device to the 82905B's
 Centronics port, but don't blame it on me if it doesn't work.  By the way,
 it has been a long time since I have seen the insides of my 82905B, and my 
 memory just might be in need of a refresh cycle, so don't quote me.




-- 
###############################################################################
#  The above are not opinions, but merely statements of fact.  Therefore, no  #
#  disclaimer is necessary.                                                   #
###############################################################################