🚀 go-pugleaf

> I have a DataFrame 20, and in general, I am very pleased with it....
> However, it has one "feature" that I am not pleased with.  Whenever I 
> turn it on, it takes 30 seconds to a minute before the disk even begins 
> to spin.  This is *almost* always true, but there are times when it 
> starts right away.

DataFrame 20's should always start to spin up as soon as power is
turned on.  What happens if you shut-down improperly is that the disk
to get accessed for several seconds before the system boots up.  If
the system is not shut down properly, the data on the drive may be in
an inconsistent state.  The system detects this by way of a status bit
at boot time and checks out the drive before running the finder.
The blinking lights on the front of the drive (in the little crack)
should tell you whether or not the drive is being accessed.  If indeed
your drive is not spinning up immediately (whirring noises) you have
problems.  I have 2 DataFrames and they have never failed to spin up.

Ross Wille - HP Labs

"Undetectable errors are treated as if no error occurred" - IBM Manual