Re: cluster modification

Article View: net.micro.pc

Article #6450

#6450

From: gjs
Date: Mon, 05 May 1986 14:13

12 lines
1154 bytes

> The method that I have heard used is to first low-level format the
> drive then FDISK it and then FORMAT it with PC-DOS 3.10.  PC-DOS 3.10
> has been made so then the boot information is not overwritten, if it
> is there.

On my PC (not AT), I have successfully changed the cluster size of a 20
MB disk from 8 sectors to 2 sectors by deleting and creating the DOS
partition with FDISK.  Apparently FDISK writes the BIOS parameter
block, not FORMAT.  This avoids doing a low-level format.

    -- George Snyder -- Intermetrics, Inc. -- gjs@inmet --

Technical Details

Message-ID: <10500020@faust>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!ima!inmet!faust!gjs

References: <661@nicmad.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.7.0.10 $; site faust
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!ima!inmet!faust!gjs
From: gjs@faust.UUCP
Newsgroups: net.micro.pc
Subject: Re: cluster modification
Message-ID: <10500020@faust>
Date: Mon, 5-May-86 10:13:00 EDT
Article-I.D.: faust.10500020
Posted: Mon May  5 10:13:00 1986
Date-Received: Fri, 9-May-86 11:20:59 EDT
References: <661@nicmad.UUCP>
Lines: 12
Nf-ID: #R:nicmad.UUCP:661:faust:10500020:000:550
Nf-From: faust.UUCP!gjs    May  5 10:13:00 1986

Reply to Parent Message