Help with Lotus PrintGraph

Article View: net.micro.pc

Article #7796

#7796

From: hu
Date: Mon, 01 Sep 1986 05:09

15 lines
1211 bytes

I have tried to plot a Lotus 123 graph using HP 7550 plotter. But
it seems I stucked with a feature with Lotus printgraph program: 
It insists that port #1 is parallel and port#2 is serial port. 
Since I am connecting HP plotter via a RS232 serial port with 9600 baud
rate, I choose port #2 in the /Configure/Interface manual. It turns out
that the system asking me to wait, and practically, my XT compatible 
hangs indefinitely and has to be reboot every time. Could any knowledgeble
people in the net make some suggestion? I have tried the MODE command
of DOS and  failed. I have tried to run other program which drives the 
same plotter, it works beutifully.

Thanks for any suggestions.

hu@smu

Technical Details

Message-ID: <15000033@smu>

Path:

arc1-ca.pugleaf.net!utzoo!mnetor!seismo!caip!princeton!allegra!ulysses!mhuxr!mhuxn!ihnp4!inuxc!pur-ee!uiucdcs!convex!smu!hu

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!caip!princeton!allegra!ulysses!mhuxr!mhuxn!ihnp4!inuxc!pur-ee!uiucdcs!convex!smu!hu
From: hu@smu
Newsgroups: net.micro.pc
Subject: Help with Lotus PrintGraph
Message-ID: <15000033@smu>
Date: Mon, 1-Sep-86 01:09:00 EDT
Article-I.D.: smu.15000033
Posted: Mon Sep  1 01:09:00 1986
Date-Received: Tue, 2-Sep-86 21:22:42 EDT
Lines: 15
Nf-ID: #N:smu:15000033:000:699
Nf-From: smu!hu    Sep  1 00:09:00 1986