Re: Questions on Compaq 286

Article View: net.micro.pc

Article #8006

#8006

From: Daniel M. Frank
Date: Wed, 24 Sep 1986 14:59

24 lines
1607 bytes

In article <477@inuxh.UUCP> rdr@inuxh.UUCP (Robert Rindfuss) writes:
>A warning from my experience - a Hardcard 20 from Plus Develepment will not
>work in a Compaq 286 Portable, or in the Portable II.  Folks at Plus said
>they use different interrupts for the controller or something like that
>(the guy wasn't sure).  This may apply to putting other controllers as well.

   The guy was wrong.  I run a stock Unix port on my Deskpro 286 (which uses
the same interrupts as the portable 286), and it runs just fine.  Doesn't
use the BIOS, so the interrupts must be the same.  In fact, the behaviour
of the controller board must be identical to that in the AT, also.

   By the way, I forgot to ask the original poster why he needs another
hard disk controller for the 286:  the one that's in there will support
two hard disks.  I built a new daisy chain control cable and outboarded
a Toshiba 72 Mb. drive; works great.

-- 
--------

    Dan Frank

    uucp: ... uwvax!prairie!dan
    arpa: dan%caseus@spool.wisc.edu

Technical Details

Message-ID: <202@prairie.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!uwvax!astroatc!prairie!dan

References: <301@linus.UUCP> <477@inuxh.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!uwvax!astroatc!prairie!dan
From: dan@prairie.UUCP (Daniel M. Frank)
Newsgroups: net.micro.pc
Subject: Re: Questions on Compaq 286
Message-ID: <202@prairie.UUCP>
Date: Wed, 24-Sep-86 10:59:36 EDT
Article-I.D.: prairie.202
Posted: Wed Sep 24 10:59:36 1986
Date-Received: Wed, 24-Sep-86 22:11:53 EDT
References: <301@linus.UUCP> <477@inuxh.UUCP>
Reply-To: dan@prairie.UUCP (Daniel M. Frank)
Distribution: net
Organization: Prairie Computing, Madison, Wisconsin
Lines: 24

Reply to Parent Message