CAD for IBM PC

Article View: net.micro.pc

Article #8008

#8008

From: James P. Kiely
Date: Tue, 23 Sep 1986 19:34

21 lines
1368 bytes

I am planning to buy an IBM PC/AT for the expressed purpose
of CAD.  I am planning to use it immediately for schematic
capture and Printed Circuit Board design.  In the future, I
will also be doing semi-custom IC work (ASIC's) and circuit
simulation.

- What configuration machine should I buy?

- Where can I find an authoritative review of CAD software for the PC?

- Does anyone on the net have any suggestions for packages that I should
  either look into or avoid?

As usual, I will summarize the results of these queries to the net.
Thanks.
-- 
 
NAME:     James P. Kiely                USPS:   Lown Cardiovascular Laboratory
USENET:   ...!harvard!lownlab!kiely             Harvard School of Public Health
PHONE:    +1 617 732 1307                       665 Huntington Avenue
                                                Boston, MA 02115-9915

Technical Details

Message-ID: <182@lownlab.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!uwvax!husc6!hscfvax!lownlab!kiely

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!uwvax!husc6!hscfvax!lownlab!kiely
From: kiely@lownlab.UUCP (James P. Kiely)
Newsgroups: net.micro.pc
Subject: CAD for IBM PC
Message-ID: <182@lownlab.UUCP>
Date: Tue, 23-Sep-86 15:34:29 EDT
Article-I.D.: lownlab.182
Posted: Tue Sep 23 15:34:29 1986
Date-Received: Wed, 24-Sep-86 22:22:53 EDT
Organization: Lown Cardiovascular Laboratory, Harvard University
Lines: 21
Keywords: CAD PCB schematic ASIC