Re: 40 Meg hard drive in pc/AT, HELP!

Article View: net.micro.pc

Article #8119

#8119

From: berger
Date: Wed, 01 Oct 1986 21:04

10 lines
1091 bytes

The problem here is that the drive parameters are in ROM on the
disk controller board, and you're limited to the specific drives
that were anticipated by the controller manufacturer.  The Golden
Bow roms add additional drive parameter tables and possibly (I
have no way to verify this) the code to let the disk controller
read the drive parameters from the first sector of the disk
(thus the need to use the special Golden Bow device driver).
Some disk controller firmware, such as the Adaptec 2070, has
this feature built-in.

Technical Details

Message-ID: <9200023@clio>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!cbatt!ihnp4!inuxc!pur-ee!uiucdcs!uiucuxc!clio!berger

References: <260@psueea.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!cbatt!ihnp4!inuxc!pur-ee!uiucdcs!uiucuxc!clio!berger
From: berger@clio.Uiuc.ARPA
Newsgroups: net.micro.pc
Subject: Re: 40 Meg hard drive in pc/AT, HELP!
Message-ID: <9200023@clio>
Date: Wed, 1-Oct-86 17:04:00 EDT
Article-I.D.: clio.9200023
Posted: Wed Oct  1 17:04:00 1986
Date-Received: Sat, 4-Oct-86 08:40:38 EDT
References: <260@psueea.UUCP>
Lines: 10
Nf-ID: #R:psueea.UUCP:260:clio:9200023:000:528
Nf-From: clio.Uiuc.ARPA!berger    Oct  1 16:04:00 1986

Reply to Parent Message