🚀 go-pugleaf

> 
> > Question: is it possible to identify in software the type of processor
> > a program is running on (assuming MS-DOS here...)?  I would like to
> > know whether it's an 8088, 8086, 80188, 80186 or an 80286.  If it
> > is possible, how do I do it?
> 
> Yes, it is possible, at least to distinguish between {8086|8088},
> {80186|80188}, and 80286 flavors of processors.  The 8086 (and the 8088,
> I guess) don't mask shift counts, so if you shift a 2 in AX by a number
> of places greater than 16 (?or 32, maybe -- 32 works for sure) you'll
> get a zero.  On the 186 and 286 you'll get a non-zero value.  To
> distinguish between the 186 and the 286, do a PUSH SP, pop it into
> another register and compare it.  The 186 pushes the SP value *after*
> it's been decremented, the 286 pushes the SP value *before* it's
> decremented.
> 
> I don't know if you can tell if you're on a *8 or *6 version processor,
> though.
> 
> Good luck!
> Kevin Dack
> ..ctvax!trsvax!kevin

The latest issue of the PC TECH Journal (April 86) discusses these issues
(including differentiating from the NEC 20/30, and includes a test
program.  Their way off differentiating an 8/6 is to make use of the
fact that they have different length instruction buffers.
Ihor Kinal
ihnp4!mtung!ijk
P.S.  One discrepancy: the article claims that in a 286, it's
no longer legal to say MOV CS, AX; nor can one say POP CS.
Using DEBUG, I tried both; the MOV CS,AX seemed ok, the POP CS
totally hung the machine. If both were true, then how could a program
reset the CS register????