Thread View: net.micro.pc
2 messages
2 total messages
Started by Dana C. Leong
Tue, 23 Sep 1986 17:27
Configuring Fujitsu floppy drives
Author: Dana C. Leong
Date: Tue, 23 Sep 1986 17:27
Date: Tue, 23 Sep 1986 17:27
7 lines
775 bytes
775 bytes
Help me, Spock! Seriously - has anyone ever configured Fujitsu DSDD floppy drives? Specifically, I need to know how to tell a drive that it is `A:' or `B:'. Any suggestions will be happily consumed. Dana
Re: Configuring Fujitsu floppy drives
Author: Maintenance Account
Date: Wed, 24 Sep 1986 05:31
Date: Wed, 24 Sep 1986 05:31
21 lines
1018 bytes
1018 bytes
> Help me, Spock!
>
> Seriously - has anyone ever configured Fujitsu DSDD floppy drives?
> Specifically, I need to know how to tell a drive that it is `A:' or `B:'.
> Any suggestions will be happily consumed.
>
> Dana
The drive select jumper should be on DS1 for drive A, DS2 for drive B.
Oh, by the way. You don't need the terminator resistor on any of
the drives if they're all fuji's.
Hope this helps.
--
/Dave Edick/
{hplabs,ihnp4}!qantel!dosadi!root
"I come in peace, take me to your lizard"
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads