🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

6 total messages Started by EDWindes Wed, 29 Oct 1986 19:36
CGA adaptors with TTL output?
#8610
Author: EDWindes
Date: Wed, 29 Oct 1986 19:36
12 lines
975 bytes
A friend recently bought a Leading Edge Model D computer, and I became
  her (unpaid) computer consultant.  She is very happy with it, but
  would like to run programs written for the CGA.  Unfortunately, her
  student budget was taxed nearly to its limits, and can't accomidate
  a color monitor.
PHEWW!  OK HERE'S THE QUESTION:

Is there such a thing as a CGA board that spits out TTL signals compatible
  with a monochrome monitor?  If so which ones?  Please mail responses.

thanks.					ed windes (...ihnp4!ihopa!edw)
Re: CGA adaptors with TTL output?
#8614
Author: tj
Date: Thu, 30 Oct 1986 15:01
6 lines
907 bytes
There are a number of video boards that will emulate CGA on a mono screen.
We have used ATI Graphics Solution quite successfully here. It does a lot
more than emulate CGA. It will drive TTL mono, RGB, Composite, and also
emulate a Herc Graphics card. Good hunting... Oh... they also have out
an EGA solution that does all the above plus EGA...
tj
Re: CGA adaptors with TTL output?
#8657
Author: berger
Date: Thu, 30 Oct 1986 21:35
4 lines
753 bytes
Actually, the IBM CGA works fine with a monochrome monitor.  You just
can't use the IBM monochrome monitor.  There are others that can be
made to work with just a special cable.
Re: CGA adaptors with TTL output?
#8673
Author: Michael Roper
Date: Fri, 31 Oct 1986 02:09
18 lines
1257 bytes
In article <1986Oct30.100153.19542@utcs.uucp>, tj@utcs.uucp (tj) writes:
> There are a number of video boards that will emulate CGA on a mono screen.

I only tried one and it performed miserably.  It was a Paradise card.
It was brutally slow and caused all manner of flicker/breakup problems.
I beat a hasty retreat.

-- 

--Michael Roper      ARPA:  roper@june.cs.washington.edu
                     UUCP:  {ihnp4|decvax|ucbvax}!uw-beaver!uw-june!roper
                    CSNET:  roper.uw-june@rand-relay

                               ==============   

                      "Calvin, do you believe in God?"

                     "Well...SOMEBODY is out to get me."
Monochrome monitor with CGA card
#8672
Author: John Plocher
Date: Sun, 02 Nov 1986 01:47
20 lines
1533 bytes
berger@clio.uiuc.arpa writes:
>Actually, the IBM CGA works fine with a monochrome monitor.  You just
>can't use the IBM monochrome monitor.  There are others that can be
>made to work with just a special cable.

[ I tried mailing - but I can't seem to get there from here...]

    Can you tell me more?   I have a CGA sitting on the shelf cuz I can't
    afford a color monitor yet.  In any case, I'd much rather use the CGA
    with a monochrome screen anyways.  What kinds of monitors will this
    work with?  What inputs must I look for? This is the first I've heard
    of this, so if you could point me to where I might find more info on
    this, I'd be grateful!

-- 
"Never trust an idea you get sitting down" - Nietzche
------------	{harvard,seismo}!uwvax!uwmacc!uwhsms!plocher        (work)
John Plocher    {harvard,seismo}!uwvax!puff!plocher                 (school)
------------	decvax!encore!vaxine!spark!121!0!John_Plocher       (FidoNet)
Re: Monochrome monitor with CGA card
#8702
Author: Jeff Denenberg
Date: Mon, 03 Nov 1986 15:11
26 lines
1914 bytes
> berger@clio.uiuc.arpa writes:
> >Actually, the IBM CGA works fine with a monochrome monitor.  You just
> >can't use the IBM monochrome monitor.  There are others that can be
> >made to work with just a special cable.
> 
> [ I tried mailing - but I can't seem to get there from here...]
> 
>     Can you tell me more?   I have a CGA sitting on the shelf cuz I can't
>     afford a color monitor yet.  In any case, I'd much rather use the CGA
>     with a monochrome screen anyways.  What kinds of monitors will this
>     work with?  What inputs must I look for? This is the first I've heard
>     of this, so if you could point me to where I might find more info on
>     this, I'd be grateful!
> 
> -- 
> "Never trust an idea you get sitting down" - Nietzche
> ------------	{harvard,seismo}!uwvax!uwmacc!uwhsms!plocher        (work)
> John Plocher    {harvard,seismo}!uwvax!puff!plocher                 (school)
> ------------	decvax!encore!vaxine!spark!121!0!John_Plocher       (FidoNet)

ITT has a monochrome monitor with two input cables; one for use with a MONO
adaptor(or hercules) and the other for use with a CGA. It is called a "DUAL
FREQUENCY" monitor and is reasonably priced. It automatically switches mode
when input is received on one of the cables.

                        Jeff Denenberg
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads