procomm 2.4.2 documentation?

Thread View: net.micro.pc

4 messages

[T] Back to Threads [V] Tree View [G] Group Articles

4 total messages Started by Alan S. Fink Sat, 01 Nov 1986 23:19

#8693

Author: Alan S. Fink
Date: Sat, 01 Nov 1986 23:19

27 lines
1292 bytes

Recently someone posted procomm 2.4.2 on the net (either net.micro.pc or
net.sources, I can't remember which).

Anyway, after downloading it for a trial run, I discovered (uponn decoding
and de-arcing) that there was no documentation included!!!

Therefore, can some kind soul please e-mail me the documentation.  From what
I've seen so far, procomm seems okay - it would probably be even better when
I get some documentation (so I'll know what I'm doing).

Thanks in advance.
Alan S. Fink
UUCP:  {allegra, hocsd, philabs, ogcvax}!sbcs!asf
ARPA:  asf%suny-sb.csnet@csnet-relay.ARPA
CSNET: asf@suny-sb.edu

               



-- 
Alan S. Fink
UUCP:  {allegra, hocsd, philabs, ogcvax}!sbcs!asf
ARPA:  asf%sunysb.csnet@csnet-relay.ARPA
CSNET: asf@sunysb.edu

Re: procomm 2.4.2 documentation?

#8755

Author: Tom Armistead
Date: Mon, 03 Nov 1986 17:08

19 lines
1140 bytes

In article <222@sbcs.UUCP>, asf@sbcs.UUCP writes:
> Recently someone posted procomm 2.4.2 on the net (either net.micro.pc or
> net.sources, I can't remember which).
> 
> Anyway, after downloading it for a trial run, I discovered (uponn decoding
> and de-arcing) that there was no documentation included!!!

If it is of any help the documentation for ProComm 2.4.2 is the same as that
for ProComm 2.4, 2.4a, 2.4b and 2.4.1...

Tom
---
UUCP:
                          ihnp4\
                                \killer!toma
                                /
  drillsys!infoswx!convex!dj3b1/

Tom Armistead

Re: procomm 2.4.2 documentation?

#8740

Author: Scott Presnell
Date: Thu, 06 Nov 1986 21:54

28 lines
1398 bytes

In article <222@sbcs.UUCP> asf@sbcs.UUCP (Alan S. Fink) writes:

>Recently someone posted procomm 2.4.2 on the net (either net.micro.pc or
>net.sources, I can't remember which).

>Therefore, can some kind soul please e-mail me the documentation.  From what
>I've seen so far, procomm seems okay - it would probably be even better when
>I get some documentation (so I'll know what I'm doing).
>
>Thanks in advance.

I am in the same boat.. the documentation is needed here. just put me on
your `CC:' list please!

Thanks in advance.



-- 
-----------

Scott Presnell  Eidgnoessische Technische Hochschule, Zuerich (ETH-Zentrum)
		Labor Fuer Organische Chemie
		Universitaetsstrasse 16
		CH-8092 Zuerich Switzerland.

uucp:		...seismo!mcvax!cernvax!ethz!srp     (srp@ethz.uucp)
earn/bitnet:	Benner@CZHETH5A

Re: procomm 2.4.2 documentation?

#8776

Author: Godfrey Lee
Date: Mon, 10 Nov 1986 17:26

27 lines
1612 bytes

In article <329@killer.UUCP> toma@killer.UUCP (Tom Armistead) writes:
>In article <222@sbcs.UUCP>, asf@sbcs.UUCP writes:
>> Recently someone posted procomm 2.4.2 on the net (either net.micro.pc or
>> net.sources, I can't remember which).
>> 
>> Anyway, after downloading it for a trial run, I discovered (uponn decoding
>> and de-arcing) that there was no documentation included!!!
>
>If it is of any help the documentation for ProComm 2.4.2 is the same as that
>for ProComm 2.4, 2.4a, 2.4b and 2.4.1...
>

Well, not quite. I went back to procomm 2.4.1 to look for the documentation,
and found that one of the 9 parts (forget which) was truncated. Guess what,
it was right in the middle of the documentation file!!

Can someone please post the documentation for procomm?
-- 
--------------------------------------
Godfrey Lee
Cognos Incorporated
3755 Riverside Drive
Ottawa, Ontario
CANADA  K1G 3N3
(613) 738-1440
decvax!utzoo!dciem!nrcaer!cognos!glee
--------------------------------------

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads