🚀 go-pugleaf

    Has anyone used this product from Fox and Geller?  There
was an ad in a recent Byte, and it looks intriguing because it
claims to be faster than Clipper, and yet retains the power of
the dot-prompt interactive mode. It is also cheaper than Dbase III+
at $395 vs $595 retail. Any comments or suggestions as to where to
get it would be appreciated. I tried PC Connection, and some other
places, but had no luck.
                                    Thanks in advance,
                                         Tom Shields

/ hpcnof:net.micro.pc / phillips@cgfsv1.dec.com /  8:08 pm  Nov  3, 1986 /
Can anybody help me locate a Technical Reference Manual for an AT&T 6300
PC and possibly a programmers manual. I've checked with the local stores 
but even though these manuals are listed they seem unable to obtain them.
Thanks in advance for any help you can offer.....Jim
----------

   Jim,

     I've had my AT&T6300 Programmer's Guide and Technical Reference
Manuals for about one year now.  I found the Programmer's Guide in a
CompuShop in Phoenix, when I lived there.  I bought the Technical Reference 
manual (the one with schematics) through AT&T's National Parts Service
(sorry, I don't have the number -- but it is an 800 number).  Each manual
costs ~$65 but that was a year ago.

     I hope that helps.

Tom Hjellming
Colorado Networks Division
Hewlett-Packard
...!hplabs!hpfcla!hpcnof!thj

In article <6239@decwrl.DEC.COM> phillips@cgfsv1.dec.com writes:
>Can anybody help me locate a Technical Reference Manual for an AT&T 6300
>PC and possibly a programmers manual. I've checked with the local stores 
>but even though these manuals are listed they seem unable to obtain them.

We have both the software tech ref. (basically the ms-dos programmers
guide) and the hardware reference manual.  We ordered the Hardware
reference direct from A.T. & T.

The hardware technical reference, complete with schematics, is:

ComCode: 403319023  ATTIS MAN: 245450105IS
Titled:  Reference Manual, AT&T Personal Computer 6300 

AT&T Parts ordering is at 800-222-7278
AT&T Software & Tech Support is at 800-922-0354

I do not remember the price.  Good Luck.

>Can anybody help me locate a Technical Reference Manual for an AT&T 6300
>PC and possibly a programmers manual. I've checked with the local stores 
>but even though these manuals are listed they seem unable to obtain them.

All manuals can be ordered from AT&T directly, usually for about $65.
(The information found in these manuals is well worth the cost).  The
toll free number is:
                        (800) 432 6600

Mike Scheutzow                  UUCP: gt6294b@gitpyr.uucp
Georgia Tech                    ARPA: gt6294b@pyr.ocs.gatech.edu