Article View: net.micro.trs-80
Article #620Re: comm4
From: Michael S. Leibow
Date: Sun, 27 Jul 1986 18:01
Date: Sun, 27 Jul 1986 18:01
18 lines
1273 bytes
1273 bytes
In article <3910@reed.UUCP> johnw@reed.UUCP (John Windberg) writes:
>Does anyone have a termcap entry for comm trsdos6.2 model 4?
M4|trs4|trs-80 model 4:\
:bc=^X:bw:cr=^]:nl=^Z:cl=^L:up=^[:am:bs:\
:ho=\034:do=^Z:kb=^H:kd=^J:kl=^H:kr=^I:ku=\013:\
:li#24:co#80:nd=^Y:ce=^^:so=\020:se=\021:
You can set your baud rate using setcom. To see what it is set at don't give
it any arguments. To set baud rate type "setcom (baud=1200)" and it will
change. Once you have your comm port the way you like it, and everything else
on your disk is fine, than type "sysgen" and it will permanently configure
your setup.
--
Michael S. Leibow
UUCP: {allegra,seismo}!rochester!ritcv!msl5864
CSNET: msl5864%rit@csnet-relay.ARPA
Technical Details
Message-ID:
<9884@ritcv.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rochester!ritcv!msl5864References:
<3910@reed.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rochester!ritcv!msl5864 From: msl5864@ritcv.UUCP (Michael S. Leibow) Newsgroups: net.micro.trs-80 Subject: Re: comm4 Message-ID: <9884@ritcv.UUCP> Date: Sun, 27-Jul-86 14:01:04 EDT Article-I.D.: ritcv.9884 Posted: Sun Jul 27 14:01:04 1986 Date-Received: Sun, 27-Jul-86 21:07:40 EDT References: <3910@reed.UUCP> Reply-To: msl5864@ritcv.UUCP (Michael S. Leibow) Organization: Rochester Institute of Technology, Rochester, NY Lines: 18