🚀 go-pugleaf

In article <31800003@exunido.UUCP> hmm@exunido.UUCP writes:
>Incorporating the f-protocol into other uucp's is fairly simple,
>I have done this once for xenix uucp in 2 days.  Doing the PAD dialling
>is a bit more work, but it's possible, too.  One hint:  If your PAD
>allows to set the remote parameters on incoming calls, use this feature !
>It saves you a lot of hassle with callers who don't know how to set their
>PAD parameters correctly.  The MICOM PAD, which we use here at unido
>supports this, for example (I guess others have similar facilities).

The above works fine, provided that your site is receiving X.25 connects
only.  I've written a full-blown dialer that works with MICOM and Motorola
PADS.  It works very similarly to normal ACU's - eg: "phone numbers" in L.sys
and L-dialcodes along with "chat scripts" (which you'd probably have to tear
out of for non-4.3 BSD UUCP). It may have made it to Rick Adams in time for 
4.3 BSD UUCP, but I'm not sure.  

The dialer allows the SA to set up the PAD channel for "cu"-out type usage.
When the dialer starts, it sets all of the parameters to the right values,
then dials the number given in the L.sys/L-device phone number locations.

Contact me if you want a copy...
-- 
Chris Lewis
Spectrix Microsystems Inc,
UUCP: {utzoo|utcs|yetti|genat|seismo}!mnetor!spectrix!clewis
ARPA: mnetor!spectrix!clewis@seismo.css.gov
Phone: (416)-474-1955