Need info on lighting boards

Thread View: net.theater

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Bret Marquis Tue, 16 Apr 1985 05:04

#36

Author: Bret Marquis
Date: Tue, 16 Apr 1985 05:04

34 lines
1597 bytes

Ok theatre people,  Its time for us to replace our 30+ year old
light board.  Its down to about 8 (out of 24) working channels. We
need suggestions on sources of new (or near new) boards.

I've been looking at some pretty pictures for Spectrum Design boards
and they would probably do the job, but they are nothing
outstanding.

What we need is a system with 24 channel (min) and 3 scene (min)
2.5kw per dimmer.

Ideally we can add a pc at some time to control
the thing.

If you know soures for computer controllers, that would be helpful
as well.  The only source I know of wants $1800 for an IBM PC  board
with software.  Controls 12 channels.  Too expensive for us.  That
would be over $3500 plus the PC just to control 24 dimmers.


Thanks very much,

Bret Marquis
Marquis Public Theatre
3717 India St.
San Diego, Ca. 92103

(sdcsvax, ihnp4) bang!bam
-- 
Bret Marquis

(sdcsvax,ihnp4)!bang!bam
Bang World Communication Center - San Diego.

Re: Need info on lighting boards

#37

Author: Mark Adolph
Date: Fri, 19 Apr 1985 00:45

9 lines
882 bytes

*** REPLACE THIS LINE WITH YOUR MESSAGE ***

Please put responses to this on the net.  I would be very interested in
obtaining any information I can.  Thanks.

					-- Mark A.
					...uw-beaver!ssc-vax!adolph

 "When a fly lands on the ceiling, does it do a half roll or a half loop?"

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads