Need procedure for forming new news group

Thread View: news.admin.policy

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by D Parsons Sun, 10 Jan 1993 12:55

#332

Author: D Parsons
Date: Sun, 10 Jan 1993 12:55

15 lines
1369 bytes

 I moderate a BITNET group and wish to port it through an Internet gateway
to a new group sci.med.hspnet. My list is HSPNET-L@albnydh2.bitnet and
covers extended hospital consulting via computer networks. It has been 
operating for 3 years with 400 subscribers but does not reach many unix
users. This is a serious loss since some of the best hopsital WANS and 
LANS are unix based with X-window terminals.
  Please tell me the procedure for an unmoderated group aimed at healthcare
providers. Also about the availability of an Internet gateway and the 
relay software (I see that the berkeley gate way to sci.med is no longer
operating. Thanks, Don Parsons MD.
-- 

Donald F. Parsons MD, Wadsworth Ctr. Rm C273, NY State Dept of Health, ESP,
PO Box 509, Albany, NY 12201-0509. (518)474-7047 Fax: (518)474-7992
dfp10@uacsc2.albany.edu dfp10@albnydh2.bitnet Cis 71777,212

Re: Need procedure for forming new news group

#336

Author: Lachlan Cranswick
Date: Mon, 11 Jan 1993 14:39

23 lines
1295 bytes

If I could save a few keystrokes and latch onto this
post a similar request for the way of forming a new
newsgroup.

The intended group is sci.diffraction   This would 
be an unmoderated group dealing with any diffraction
topic, i.e., X-ray diffraction, neutron diffraction,
hardware, analysis, software, results, etc.

As there is usually Powder/Single Crystal
X-ray diffractometers on most
university campuses and it is a common tool
for minerals analysis, I am hoping there may be an interest
in this.

Thanks in advance,  Lachlan.

-- 
  Lachlan Cranswick  -  CSIRO             _--_|\  lachlan@dmp.CSIRO.AU
  Division of Mineral Products           /      \ tel +61 3 647 0367
  PO Box 124, Port Melbourne 3207        \_.--._/ fax +61 3 646 3223
  AUSTRALIA                                    v

Re: Need procedure for forming new news group

#340

Author: J Lee Jaap
Date: Tue, 12 Jan 1993 14:50

29 lines
1880 bytes

In article <1993Jan11.143937.21450@dmp.csiro.au> lachlan@dmp.csiro.au (Lachlan Cranswick) writes:

   If I could save a few keystrokes and latch onto this
   post a similar request for the way of forming a new
   newsgroup.

BTW, news.announce.newsgroups does not exist.  News.announce.newgroups
is moderated and for the purpose of posting RFDs and CFVs and is not
for questions or discussion.  Note Followup-To.

Read the article with Subject: How to Create a New Usenet Newsgroup
periodically posted in news.answers, news.admin, news.groups,
news.announce.newgroups, and a few others.  If it's expired at your
site, you can get it via anonymous ftp from rtfm.mit.edu in
/pub/usenet/news.answers/creating-newsgroups/part1 .

If you don't have ftp, send mail to mail-server@rtfm.mit.edu
with message
send usenet/news.answers/creating-newsgroups/part1

Send message `help' for more info about the mail-server.

-- 
J Lee Jaap <jaapjl@tab00.larc.nasa.gov> +1 804/864-2148
employed by, not speaking for, AS&M Inc, at NASA LaRC, Hampton VA 23681-0001
--
J Lee Jaap <J.L.Jaap@LaRC.NASA.Gov> +1 804/864-2148
    employed by, not speaking for, AS&M Inc, at
         NASA LaRC, Hampton VA 23681-0001

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads