🚀 go-pugleaf

Jeroen Scheerder <js@xs4all.nl> wrote:

> Hans Puype <hpuype@gmail.com> wrote:
> 
> > Geen van allen werkt ... zucht. 
> > Als ik probeer in te loggen, zie ik in het status window van
> > SecureClient wel 'encrypting' en vervolgens 'idle' verschijnen naast
> > Traffic: .
> 
> Niet voorbij zien komen: je output van
> 
>     netstat -rn -f inet; ifconfig -a; arp -na
> 
> (in een Terminal window uit te voeren, no admin required)

Hier istie, een hele boterham ...

iMac-24:~ hans$ netstat -rn -f inet
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif
Expire
default            10.0.1.1           UGSc        8        2    en1
10.0.1/24          link#6             UCS         2        0    en1
10.0.1.1           0:1f:f3:3d:c7:f9   UHLW        8       77    en1
1058
10.0.1.200         127.0.0.1          UHS         0        0    lo0
10.0.1.255         ff:ff:ff:ff:ff:ff  UHLWb       0       18    en1
127                127.0.0.1          UCS         0        0    lo0
127.0.0.1          127.0.0.1          UH          2      432    lo0
169.254            link#6             UCS         0        0    en1

iMac-24:~ hans$ ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
        inet6 ::1 prefixlen 128 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether 00:1e:c2:14:f4:ac 
        media: autoselect status: inactive
        supported media: autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback>
10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX
<full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX
<full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT
<full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
        lladdr 00:1f:5b:ff:fe:09:f9:8a 
        media: autoselect <full-duplex> status: inactive
        supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::21e:c2ff:fea4:4b62%en1 prefixlen 64 scopeid 0x6 
        inet 10.0.1.200 netmask 0xffffff00 broadcast 10.0.1.255
        ether 00:1e:c2:a4:4b:62 
        media: autoselect status: active
        supported media: autoselect
en7: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
        ether 54:55:43:44:52:00 
        media: autoselect status: inactive
        supported media: autoselect
Check Point Virtual Network Adapter

iMac-24:~ hans$ arp -na
? (10.0.1.1) at 0:1f:f3:3d:c7:f9 on en1 [ethernet]
? (10.0.1.255) at ff:ff:ff:ff:ff:ff on en1 [ethernet]
iMac-24:~ hans$