🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

6 total messages Started by steven jansen Sat, 07 Mar 1998 00:00
UPDATING ESCD..... SYSTEM HANGS.. Who helps??
#1767
Author: steven jansen
Date: Sat, 07 Mar 1998 00:00
23 lines
1369 bytes
Hello,

I hava an asus mainbord with an cyrix 166+ at 133 mhz CPU
with an  award bios. I have a problem

when i start my computer everything goes perfect until he displays the

figure with the info about your configuaration

proc type
hd etc. 

then he says UPDATING ESCD.... and the system hangs

who can help me

please

steven
Steven Jansen
s.jansen@inter.nl.net
Holland
Re: UPDATING ESCD..... SYSTEM HANGS.. Who helps??
#1768
Author: Jan van Oldenmark
Date: Sun, 08 Mar 1998 00:00
26 lines
1692 bytes
Try to disable the pnp os in the bios and restart again....
steven jansen heeft geschreven in bericht
<35015bbd.1093190@news1.inter.nl.net>...
>Hello,
>
>I hava an asus mainbord with an cyrix 166+ at 133 mhz CPU
>with an  award bios. I have a problem
>
>when i start my computer everything goes perfect until he displays the
>
>figure with the info about your configuaration
>
>proc type
>hd etc.
>
>then he says UPDATING ESCD.... and the system hangs
>
>who can help me
>
>please
>
>steven
>Steven Jansen
>s.jansen@inter.nl.net
>Holland
Re: UPDATING ESCD..... SYSTEM HANGS.. Who helps??
#1769
Author: Larry Friend
Date: Sun, 08 Mar 1998 00:00
43 lines
2469 bytes
And if that doesnt work -  Have you installed a new hard drive?? I had this
same EXACT  problem several months ago. I still have not figured out what I
did but in short I had to install a bios extension that would allow bios to
see disk drives greater than 540 meg. I think I got a copy of EZ bios
(might search for it). This took care of the problem.

This all started when I installed a second 1.6gig drive. BIOS was only
seeing  540meg. I did some Fdisk work (DUH Fdisk uses BIOS) to try and get
it running but to no avail.  EZ bios did the trick.

Larry

Have you ever noticed that the persons who do the most are most often
criticized by the persons who do the least??

Jan van Oldenmark wrote:

> Try to disable the pnp os in the bios and restart again....
> steven jansen heeft geschreven in bericht
> <35015bbd.1093190@news1.inter.nl.net>...
> >Hello,
> >
> >I hava an asus mainbord with an cyrix 166+ at 133 mhz CPU
> >with an  award bios. I have a problem
> >
> >when i start my computer everything goes perfect until he displays the
> >
> >figure with the info about your configuaration
> >
> >proc type
> >hd etc.
> >
> >then he says UPDATING ESCD.... and the system hangs
> >
> >who can help me
> >
> >please
> >
> >steven
> >Steven Jansen
> >s.jansen@inter.nl.net
> >Holland
Re: UPDATING ESCD..... SYSTEM HANGS.. Who helps??
#1770
Author: Rob B.
Date: Mon, 09 Mar 1998 00:00
16 lines
1350 bytes
s.jansen@inter.nl.net (steven jansen) wrote:

>Hello,
>
>I hava an asus mainbord with an cyrix 166+ at 133 mhz CPU
>with an  award bios. I have a problem

Waarom crossposten tussen nationale en internationale nieuwsgroepen?

Why crossposting between national and international newsgroups?

Rob B.

-- 
Spamblock! Change the e-mail address to reply.
Re: UPDATING ESCD..... SYSTEM HANGS.. Who helps??
#1771
Author: J.S. Klein
Date: Mon, 09 Mar 1998 00:00
20 lines
1688 bytes
Het lijkt erop dat jouw bios bij elke boot van je pc z'n data opnieuw
wegschrijft. Dat kan nooit de bedoeling zijn, omdat normaal gesproken deze
melding alleen mag optreden indien je je bios-instellingen aanpast. Er is
een optie in je bios waar je dit aan/uit kan zetten. Succes.

J.S. Klein

steven jansen <s.jansen@inter.nl.net> wrote in article
<35015bbd.1093190@news1.inter.nl.net>...
> when i start my computer everything goes perfect until he displays the
> figure with the info about your configuaration
>
> then he says UPDATING ESCD.... and the system hangs
> 
> steven
> Steven Jansen
> s.jansen@inter.nl.net
> Holland
> 
Re: UPDATING ESCD..... SYSTEM HANGS.. Who helps??
#1772
Author: peter&his cats
Date: Sat, 14 Mar 1998 00:00
32 lines
1800 bytes
steven jansen wrote:
> 
> Hello,
> 
> I hava an asus mainbord with an cyrix 166+ at 133 mhz CPU
> with an  award bios. I have a problem
> 
> when i start my computer everything goes perfect until he displays the
> 
> figure with the info about your configuaration
> 
> proc type
> hd etc.
> 
> then he says UPDATING ESCD.... and the system hangs
> 
> who can help me
> 
> please
> 
> steven
> Steven Jansen
> s.jansen@inter.nl.net
> Holland

dan probeert de pc iets te updaten vanuit de bios wat niet lukt.
check de bios instellingen.
na probleem met printerpoort had ik hetzelfde,bleek een irq conflict te
zijn,veranderd en hij boot weer als vanouds.

peter
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads