Altec 9061A Program Equalizer

Thread View: nyc.forsale

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by MarkHugh Wed, 16 Jun 1999 00:00

#65

Author: MarkHugh
Date: Wed, 16 Jun 1999 00:00

37 lines
1917 bytes

Altec Vintage Passive EQ�s  FS/T:
have a couple sets
from an old altec console
$300 each
$500/pair b/o or trade
markhugh@aol.com

The Altec 9061A Program Equalizer, normally mounted in the 9205 Input
Panel,m provides continually variable equalization at six important
frequencies; 40 or 100Hz in the low frequency range and at 3, 5,10 or 15
KHz in the hi frequency area.

Passive eq
no external power supply is necessary
Up to 12db of boost and 16db of attenuation
3 1/2"H, 1 1/2"W, 5 1/2"D
off postion switch for the low frequencies
600 ohm input and output
14db insertion loss with controls at 0 db
input level -70dbm to +20dbm max
has the same specs as the 9063B rack mounted unit

sold for $250 new in 1967

also available
copies of 9061A and 9063B spec sheets $10
9205 input panel $30 (fits in one rack space but it 1 inch short of the
19� width)
9270 mike pre/line amp $200
1588B mike transformer $50
8272-01GG fader $35

markhugh@aol.com


Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads