Pulling those RAMs

Article View: ont.micro.mac

Article #475

#475

From: info-mac
Date: Wed, 11 Jul 1984 08:10

11 lines
947 bytes

Date: Mon, 09 Jul 84 17:17 PST
From: uw-beaver!Dennis.Griesser@HIS-LA-CP6.ARPA
To: INFO-MAC@SUMEX-AIM
Subject: Pulling those RAMs

Edward.Tecot is quite correct.  When dealing with an expensive (and
presumably delicate) printed circuit board, you don't want to take
any chances.  Cut the chips out and carefully clean up afterwards.

If you care about the old chips, do the job neatly and you can
probably solder them on to DIP headers.

Technical Details

Message-ID: <4861@utcsrgv.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utcsrgv!info-mac

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site utcsrgv.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utcsrgv!info-mac
From: info-mac@utcsrgv.UUCP (info-mac)
Newsgroups: ont.micro.mac
Subject: Pulling those RAMs
Message-ID: <4861@utcsrgv.UUCP>
Date: Wed, 11-Jul-84 04:10:43 EDT
Article-I.D.: utcsrgv.4861
Posted: Wed Jul 11 04:10:43 1984
Date-Received: Thu, 12-Jul-84 16:36:01 EDT
Sender: peterr@utcsrgv.UUCP
Organization: CSRI, University of Toronto
Lines: 13