How to get back out of the debugger?

Article View: ont.micro.mac

Article #479

#479

From: info-mac
Date: Wed, 11 Jul 1984 08:11

15 lines
1302 bytes

Date:     11 Jul 84 0:55:37-EDT (Wed)
From: uw-beaver!Peterr%toronto.csnet@csnet-relay.arpa
To: info-mac@sumex-aim.arpa
Subject:  How to get back out of the debugger?

I was playing with MS-BASIC on a Lisa running MacWorks and popped up the
calculator.  It appeared, and then I was immediately deposited into the
machine-level monitor; it printed a dump of the registers, etc.  I haven't
tried to replicate the bug-- I'll do that later-- but I wonder if there's
a PC value that one can restart the machine at (via the "g" command) to
reboot.  Having to unplug the machine and power it up again is not only
a pain (one has to reset the clock, for example (Lisa has no battery)) but
makes me uneasy.

Any hints will be gratefully accepted... thanks, p. rowley, U. Toronto

Technical Details

Message-ID: <4865@utcsrgv.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utcsrgv!info-mac

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site utcsrgv.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utcsrgv!info-mac
From: info-mac@utcsrgv.UUCP (info-mac)
Newsgroups: ont.micro.mac
Subject: How to get back out of the debugger?
Message-ID: <4865@utcsrgv.UUCP>
Date: Wed, 11-Jul-84 04:11:57 EDT
Article-I.D.: utcsrgv.4865
Posted: Wed Jul 11 04:11:57 1984
Date-Received: Thu, 12-Jul-84 16:40:04 EDT
Sender: peterr@utcsrgv.UUCP
Organization: CSRI, University of Toronto
Lines: 17