🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

1 total messages Started by john chapman Mon, 13 May 1985 18:03
S100 boards for sale
#80
Author: john chapman
Date: Mon, 13 May 1985 18:03
57 lines
2028 bytes
 S100 - IEEE/696 boards for sale
 
 
 Tarbell double density disk controller
 - up to 1.2 mbytes (formatted) per drive
 - data transfer can be either DMA or PIO (programmed
   I/O, i.e. you read the data from a port a byte at a
   time)
 - full IEEE/696 compliance
 - controls up to four drives
 - CPM and/or BIOS available from manufacturer
 - can provide MS-DOS device driver listing (or
   source file if you send disk) on request
 - currently selling for $419.00  (see Byte)
 
 Lomas ram board
 - populated with 256k of 150ns rams
 - 8/16 bit transfers, full 24 bit addressing
 - requires 1.5 amps @ +5 
 - on board parity generation and error detection
 - uses Intel 8203 LSI ram controller
 - may be configured to accept phantom
 - all ram chips fully socketed
 - was $395.00 last Aug (see Byte for more specs)


 Asking $300.00 for each of the above, or $500
 for both; I'll pay for 1st class airmail.


 Also
	TDL Z80 S100 cpu with 2mhz -> 4mhz continuously
        adjustable clock. Asking $50.00 .


 All the above prices are in U.S. dollars so multiply
 by whatever the current rate is :-).

 I am open to (reasonable) offers on the above boards.

 for more information:
			John Chapman
			Computing Science Dept.
			University of Waterloo
			Waterloo, Ontario
			N2L 3G1

              or	John Chapman
			RR 4
			Mount Forest, Ontario
			N0G 2L0

	      or        ....!watmath!watcgl!jchapman

	      or	(519) 323-4977
			(>7pm EST weekdays, all day Sat&Sun)
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads