🚀 go-pugleaf

>$B$I$N$h$&$J%a%C%;!<%8$,(J

scsint1$B$G%V!<%H$7$?$H$-$N%a%C%;!<%8$G$9!#(J
$B!JC"$7!"(Jslackware$B$G$O$J$/(J Red Hat linux $B$N(Jscsint1$BAjEv$N$b$N$r;HMQ(J)

boot ramdisk aha152x=0x340,10,7,1
loading ramdisk.....
Uncomopressing linux ... done
Now booting the kernel
console :color EGA+ 80x2 ,1 virtual console(max 63)
bios30_init :BIOS32 service directory structure at 0x000f0280 
bios30_init :BIOS32 service directory entry at 0xf0210
calibrating delay loop ... ok-30.22 BogoMips
serial driver version 4.11 with no serial options enabled
tty00 at 0x03fa (irq=4)is a 16550a
tty01 at 0x02fa (irq=3)is a 16550a
lp1 at 0x0378,using polling driver
PS/2 auyiliary pointing device detocted--driver installed
hda:QUANTUM MANERICK 500A,516MB w/98KB cache,LBA,CHS=1049/16/63,MaxMult=8
hdb:TOSHIBA CD-ROM XM-5302TA,ATAPI,CDROM driver
ide0:primary interface on irq 14
mcd 0x3300.10:init failed,no Mcd device at 0x300 irq 10
Floppy dryver(s) :fd0 is 1.44MB
FDC 0 is a post-1991 82077
aha152x processing commandline :ok
detection complete
aha152x :vitaldata:portbase=0x340,irq=10,scsi id=7,reconnect=enabled,parity=enabled

scsi0 :Adaptec 152x scsidriver;$ Revision :1.9 $
scsi :1 host.
scsi :aborting comand due to timeout:pid0,scsi0,id0,lun0 test unit ready 00 00 00 00 00
aha152x :about() ,SCpnt=0x0036a6a0,QUEUE STATUS:
issue_sc :
0x0036a6a0:target=0:lum=0;cmnd=(test anit peudy 00 00 00 00 00);residual=256:buffers=0;
phase |not issued |;next 0/00000000
current_SC:
none
sconnected_SC;
waiting:scsiseq();scsisig(dataout):intstart(hi);sstat(busfree);sstat(busfree);sxfrctkq(ch1)
;signal();seid(81),sstat2(sempty);enabled interrupts(enbusfree)

scsi :aborting comand due to timeout:pid1,scsi0,id1,lun0 test unit ready 00 00 00 00 00
aha152x :about() ,SCpnt=0x0036a6a0,QUEUE STATUS:
issue_sc :
0x0036a6a0:target=0:lum=0;cmnd=(test anit peudy 00 00 00 00 00);residual=256:buffers=0;
phase |not issued |;next 0/00000000
current_SC:
none
sconnected_SC;
waiting:scsiseq();scsisig(dataout):intstart(hi);sstat(busfree);sstat(busfree);sxfrctkq(ch1)
;signal();seid(81),sstat2(sempty);enabled interrupts(enbusfree)

scsi :aborting comand due to timeout:pid2,scsi0,id2,lun0 test unit ready 00 00 00 00 00
aha152x :about() ,SCpnt=0x0036a6a0,QUEUE STATUS:
issue_sc :
0x0036a6a0:target=0:lum=0;cmnd=(test anit peudy 00 00 00 00 00);residual=256:buffers=0;
phase |not issued |;next 0/00000000
current_SC:
none
sconnected_SC;
waiting:scsiseq();scsisig(dataout):intstart(hi);sstat(busfree);sstat(busfree);sxfrctkq(ch1)
;signal();seid(81),sstat2(sempty);enabled interrupts(enbusfree)

scsi :aborting comand due to timeout:pid3,scsi0,id3,lun0 test unit ready 00 00 00 00 00
aha152x :about() ,SCpnt=0x0036a6a0,QUEUE STATUS:
issue_sc :
0x0036a6a0:target=0:lum=0;cmnd=(test anit peudy 00 00 00 00 00);residual=256:buffers=0;
phase |not issued |;next 0/00000000
current_SC:
none
sconnected_SC;
waiting:scsiseq();scsisig(dataout):intstart(hi);sstat(busfree);sstat(busfree);sxfrctkq(ch1)
;signal();seid(81),sstat2(sempty);enabled interrupts(enbusfree)

scsi :aborting comand due to timeout:pid4,scsi0,id4,lun0 test unit ready 00 00 00 00 00
aha152x :about() ,SCpnt=0x0036a6a0,QUEUE STATUS:
issue_sc :
0x0036a6a0:target=0:lum=0;cmnd=(test anit peudy 00 00 00 00 00);residual=256:buffers=0;
phase |not issued |;next 0/00000000
current_SC:
none
sconnected_SC;
waiting:scsiseq();scsisig(dataout):intstart(hi);sstat(busfree);sstat(busfree);sxfrctkq(ch1)
;signal();seid(81),sstat2(sempty);enabled interrupts(enbusfree)

scsi :aborting comand due to timeout:pid5,scsi0,id5,lun0 test unit ready 00 00 00 00 00
aha152x :about() ,SCpnt=0x0036a6a0,QUEUE STATUS:
issue_sc :
0x0036a6a0:target=0:lum=0;cmnd=(test anit peudy 00 00 00 00 00);residual=256:buffers=0;
phase |not issued |;next 0/00000000
current_SC:
none
sconnected_SC;
waiting:scsiseq();scsisig(dataout):intstart(hi);sstat(busfree);sstat(busfree);sxfrctkq(ch1)
;signal();seid(81),sstat2(sempty);enabled interrupts(enbusfree)

scsi :aborting comand due to timeout:pid6,scsi0,id6,lun0 test unit ready 00 00 00 00 00
aha152x :about() ,SCpnt=0x0036a6a0,QUEUE STATUS:
issue_sc :
0x0036a6a0:target=0:lum=0;cmnd=(test anit peudy 00 00 00 00 00);residual=256:buffers=0;
phase |not issued |;next 0/00000000
current_SC:
none
sconnected_SC;
waiting:scsiseq();scsisig(dataout):intstart(hi);sstat(busfree);sstat(busfree);sxfrctkq(ch1)
;signal();seid(81),sstat2(sempty);enabled interrupts(enbusfree)

scsi detected total
MEMORY :38084k/40960k available (664k kernel code,384k reserved,1828k data)
This processer honours the WP hit even when is supervisor mode.good.
swansea viniversity conputes society Net 3.019
IP protocols :ICMP,UDP,TCP
PPP :version 0.2.7(4 channels) New_tty_drivers ooptimize_flags
TCP compression code copyright 1989 regents of the university of california
PPP line deicipline regidtered.
SLIP :version 0.8.3-Net 3.19_NEWTTY (4 channels)(6bit encapsnlation enabled)
CSLIP :code copyright 1989 Perents of the university of carifornia
Checking 386/387 coupling...ok,fpu using exception 16 color reportonf
Checking 'het'isstruction...ok.
Linux version 1.2.13 (root@bugs.redhat.com bcc version 2.7.0)#2 tue oct 17 13:15:06 EDT 1995

Partiton check:
hda:hda1

$B$3$N@h%k!<%H%G%#%9%/$r;HMQ$9$k$N$G$9$,!"$3$N;~E@$G(Jsda$B$,G'<1$5$l$F$$$^$;$s!#(J
(scsi:1 host $B$H$J$C$F$$$k$N$K!%!%!%!K(J