🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: rec.audio
Article #1599

Re: My CD player is running slow! (!)

#1599
From: Michael C Miller
Date: Mon, 04 Jun 1990 03:17
17 lines
1423 bytes
In article <6378.26693284@umiami.miami.edu> chuck@umiami.miami.edu writes:
>question here is not slow, the tape deck is fast, and you should look for
>the pot inside the tape deck to adjust this (if one even exists!).
 Well I don't think that there is a spped adjustment in the form of a pot
on any deck. The motors I have seen in tape players have a small hole in the
rear of the motor case. The adjustment is there.

If you do try this DONT USE A METAL SCREW DRIVER TO ADJUST THE SPEED.
You will have to use a recorded tone and a scope or by ear. If you use a 
metal tool, the speed will change everytime you remove the tool! I learned this
the hard way.

michael
-- 
So , What was *REALLY* going on between Kukla, Fran and Ollie ???
<  sans =>   mcmiller@uokmax.UUCP   or  mcmiller@uokmax.ecn.uoknor.edu  > 
< '..this one goes up to eleven. Its ONE louder.'                       >
Technical Details
Message-ID: <1990Jun4.031723.7760@uokmax.uucp>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watserv1!watmath!att!pacbell!pacbell.com!ames!ucsd!usc!apple!uokmax!mcmiller
References: <1990Jun2.182334.21396@athena.mit.edu> <ABL.90Jun2233534@dart.ece.cmu.edu> <6378.26693284@umiami.miami.edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watserv1!watmath!att!pacbell!pacbell.com!ames!ucsd!usc!apple!uokmax!mcmiller
From: mcmiller@uokmax.uucp (Michael C Miller)
Newsgroups: rec.audio,sci.electronics
Subject: Re: My CD player is running slow! (!)
Message-ID: <1990Jun4.031723.7760@uokmax.uucp>
Date: 4 Jun 90 03:17:23 GMT
References: <1990Jun2.182334.21396@athena.mit.edu> <ABL.90Jun2233534@dart.ece.cmu.edu> <6378.26693284@umiami.miami.edu>
Organization: Engineering Computer Network, University of Oklahoma, Norman, OK
Lines: 17