🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: rec.audio
Article #5340

Re: Another Sub Woofer question

#5340
From: Frank I. Reiter
Date: Thu, 31 Dec 1992 19:38
19 lines
1325 bytes
> Dan "Viper" Baldwin writes:
>
>         I have a Yamaha RXV-850 reciever and an Infinity 10" subwoofer
> powered with 100 Watts. From answers to a previous post, I have gathered
> that to reap the maximum benifits from the sub-woofer, I need to include
> a cross over so that signals going to the main speakers are devoid of
> lower frequencies ( say < 200 HZ ). Doe the cross over connect to the high
> level main speaker terminals of the reciever and then divide the signal
> to the mains and the subwoofer ?

My understanding is that one can find subwoofers which are connected to your
amplifier and which pass the higher frequencies on to your regular speakers.
I haven't looked at one though (yet) so perhaps I am wrong.  Anybody?

Frank.
--
___________________________________________________________________
Frank I. Reiter                 Internet: Frank@mindlink.bc.ca
MIND LINK! Communications Corp. Surrey, British Columbia, Canada
Technical Details
Message-ID: <19068@mindlink.bc.ca>
Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!usenet.ins.cwru.edu!agate!rsoft!mindlink!a2

Show Full Headers
Complete Article Headers
Newsgroups: rec.audio
Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!usenet.ins.cwru.edu!agate!rsoft!mindlink!a2
From: Frank@mindlink.bc.ca (Frank I. Reiter)
Subject: Re: Another Sub Woofer question
Organization: MIND LINK! - British Columbia, Canada
Date: Thu, 31 Dec 1992 19:38:55 GMT
Message-ID: <19068@mindlink.bc.ca>
Sender: news@deep.rsoft.bc.ca (Usenet)
Lines: 19