🚀 go-pugleaf

Igor,

http://www.seaswirl.com/inside/boat_builder_2.cfm?boatID=25

Not considered top of the line, but I think one of the best values out
there. I've had mine (1850 Striper W/A) for 3+ years and would buy another
in a heartbeat. BTW, mine is an outboard model with a 115 Ficht - it's a
great motor, been purring like a kitten from day 1; I like the Ficht much
better than previous Honda and Yam.

Nick in Spartanburg, SC

"Igor" <igor.skubitsky@rogers.com> wrote in message
news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> Hello !
>
> I am shopping for 18" boat with I/O and have currently number of
> manufacturers to go with:
>
> SeaRay
> Stingray
> Rinker
> Regal
> Maxum
>
> What I was wondering is which manufacturer will hold the value better and
> which one is better build quality. I've done quite a bit of research but
did
> not find anything on the quality/value factor. I am basically looking for
> all-purpose bowrider - fishing, skying and a bit of performance.
>
> Help is greatly appreciated,
> Igor.
>
>

The two previous ideas, Chaparall and Sea Swirl are good addtions to your
list.  Maxum stands out in your list.  Sea Ray used to be top of the line at
one time.

I would add Cobalt to the list too.  It would be the best hands down.
Probably the best resale value too.

Buck
#183
"Igor" <igor.skubitsky@rogers.com> wrote in message
news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> Hello !
>
> I am shopping for 18" boat with I/O and have currently number of
> manufacturers to go with:
>
> SeaRay
> Stingray
> Rinker
> Regal
> Maxum
>
> What I was wondering is which manufacturer will hold the value better and
> which one is better build quality. I've done quite a bit of research but
did
> not find anything on the quality/value factor. I am basically looking for
> all-purpose bowrider - fishing, skying and a bit of performance.
>
> Help is greatly appreciated,
> Igor.
>
>

I would highly recommend looking at Malibu boats out of Vernon BC .The boats
you listed will do the job but are mass produced .Malibus are hand made and
heavier.Check out there website but don't be fooled by malibu boats out of
California.Different manufacture good luck..
"Igor" <igor.skubitsky@rogers.com> wrote in message
news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> Hello !
>
> I am shopping for 18" boat with I/O and have currently number of
> manufacturers to go with:
>
> SeaRay
> Stingray
> Rinker
> Regal
> Maxum
>
> What I was wondering is which manufacturer will hold the value better and
> which one is better build quality. I've done quite a bit of research but
did
> not find anything on the quality/value factor. I am basically looking for
> all-purpose bowrider - fishing, skying and a bit of performance.
>
> Help is greatly appreciated,
> Igor.
>
>

Don't forget www.larsonboats.com  We love ours!

--
===============
Steve Barker
Stilwell, Kansas
UP (Mopac) Coffeyville Sub MP 308
Nikon CP 995 PSP 7.04

Remove the "nospam" from my address to abuse my email box.

=======================
"Igor" <igor.skubitsky@rogers.com> wrote in message
news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> Hello !
>
> I am shopping for 18" boat with I/O and have currently number of
> manufacturers to go with:
>
> SeaRay
> Stingray
> Rinker
> Regal
> Maxum
>
> What I was wondering is which manufacturer will hold the value better and
> which one is better build quality. I've done quite a bit of research but
did
> not find anything on the quality/value factor. I am basically looking for
> all-purpose bowrider - fishing, skying and a bit of performance.
>
> Help is greatly appreciated,
> Igor.
>
>

And I'd add that Larson and Glastron are VERY similar (both made by Genmar).

-W

"Steve Barker" <railphotonut@hotmail.nospam.com> wrote in message
news:83lQ9.55294$Zt4.694951@twister.rdc-kc.rr.com...
> Don't forget www.larsonboats.com  We love ours!
>
> --
> ===============
> Steve Barker
> Stilwell, Kansas
> UP (Mopac) Coffeyville Sub MP 308
> Nikon CP 995 PSP 7.04
>
> Remove the "nospam" from my address to abuse my email box.
>
> =======================
> "Igor" <igor.skubitsky@rogers.com> wrote in message
> news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> > Hello !
> >
> > I am shopping for 18" boat with I/O and have currently number of
> > manufacturers to go with:
> >
> > SeaRay
> > Stingray
> > Rinker
> > Regal
> > Maxum
> >
> > What I was wondering is which manufacturer will hold the value better
and
> > which one is better build quality. I've done quite a bit of research but
> did
> > not find anything on the quality/value factor. I am basically looking
for
> > all-purpose bowrider - fishing, skying and a bit of performance.
> >
> > Help is greatly appreciated,
> > Igor.
> >
> >
>
>

Thanks for your feedback. From what I can see manufacturer does not make a
difference as soon as it is known to the public. It is personal preference
and I guess I will buy the one where I feel comfortable and like the look.

Thanks again and Happy New Year to everyone !

"Igor" <igor.skubitsky@rogers.com> wrote in message
news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> Hello !
>
> I am shopping for 18" boat with I/O and have currently number of
> manufacturers to go with:
>
> SeaRay
> Stingray
> Rinker
> Regal
> Maxum
>
> What I was wondering is which manufacturer will hold the value better and
> which one is better build quality. I've done quite a bit of research but
did
> not find anything on the quality/value factor. I am basically looking for
> all-purpose bowrider - fishing, skying and a bit of performance.
>
> Help is greatly appreciated,
> Igor.
>
>

 Manufacturer still does make a difference!  Take Bayliners (PLEASE,
kidding).  Their bad rap comes from the fact they are a cheap boat, but they
are also cheap to buy and as long as you don't expect a used one to sell for
the same as a used SeaRay..

My preference from that list is Regal, I traded an 85 28' Regal in on a 21'
2000 Regal cuddy.  High tech hull does great speed for given power, has no
issues running Lake Hurons hissy fits and carries a life time hull warranty.
Other things to keep in mind is a small handfull of manufacturers have ISO
9001 certification (like Regal) and ISO isn't a crock, it really doesn take
quality and consistancy to get it.  IMO, Searay is still an excellent boat
but has slipped down the ladder a bit, in the late 80's early 90's they were
one of the only sensible used choices, now they are still good, but just
good.  Rinker's (too me) are a little behind on the latest styles and
building techniques, leave me the impression of a utility or fish only boat.
Stingray has some nice boats, but has had some past weaknesses that may make
it harder to sell later.  Maxum appears to make a very nice boat, but I have
never been in one to see how it handles etc..

Decide first, what are you going to use it for, fishing mostly, pulling kids
on toys, taking friends for pleasant cruises, getting from A to B etc etc.
Will it be trailered a lot or just a couple of times a season.  Do you want
speed, or space, or low cost, or top looks..  No 2 18 footers will be the
same size, a Wilker 18' is a huge 18' (and a bit of a barge, but sensational
fishing boat), a Glastron type 18' does well to hold 4 people but is very
fast.  A Regal 18' looks very modern (too much so for some) and a SeaRay 18'
looks very 'classic'.

From your e-address I assume you may be near T.O...  If so, do not miss the
Toronto Int Boat Show in about 2 weeks, almost every breed of 18 will be
there.

Greg Moore

"Igor" <igor.skubitsky@rogers.com> wrote in message
news:_xnQ9.133403$F2h1.112936@news01.bloor.is.net.cable.rogers.com...
> Thanks for your feedback. From what I can see manufacturer does not make a
> difference as soon as it is known to the public. It is personal preference
> and I guess I will buy the one where I feel comfortable and like the look.
>
> Thanks again and Happy New Year to everyone !
>
> "Igor" <igor.skubitsky@rogers.com> wrote in message
> news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> > Hello !
> >
> > I am shopping for 18" boat with I/O and have currently number of
> > manufacturers to go with:
> >
> > SeaRay
> > Stingray
> > Rinker
> > Regal
> > Maxum
> >
> > What I was wondering is which manufacturer will hold the value better
and
> > which one is better build quality. I've done quite a bit of research but
> did
> > not find anything on the quality/value factor. I am basically looking
for
> > all-purpose bowrider - fishing, skying and a bit of performance.
> >
> > Help is greatly appreciated,
> > Igor.
> >
> >
>
>

About the I/O ... I was advised go Mercruiser. And with an 18' fiberglass I
would suggest minimum 185 hp (which is what I have). So that would be a 6
cyl and alpha outdrive. If you go bigger hp look into bravo outdrive and so
on ... suggest browse the Mercruiser site for info on that. I see new 18'
boats at the shows with 130 hp I/O ... can that hp even achieve plane with 4
adults aboard ??? I would guess my 18' 185 hp would require the 19" prop to
pull skiers or carry 4 adults... the 21" is ok for me, 1 passenger and our
gear ... but barely ... I can reach 4600 rpm, the engine is rated 4800 rpm
... a 20" prop would be best for engine loading and so on. However we cruise
typically at 30 mph at 3000 rpm ... or slower say just looking around at
1000 rpm. To sum up ... form my experience suggest a 6 cyl minimum ... at
least 185 hp ... carburated or fuel injection your personal choice.

Igor <igor.skubitsky@rogers.com> wrote in message
news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> Hello !
>
> I am shopping for 18" boat with I/O and have currently number of
> manufacturers to go with:
>
> SeaRay
> Stingray
> Rinker
> Regal
> Maxum
>
> What I was wondering is which manufacturer will hold the value better and
> which one is better build quality. I've done quite a bit of research but
did
> not find anything on the quality/value factor. I am basically looking for
> all-purpose bowrider - fishing, skying and a bit of performance.
>
> Help is greatly appreciated,
> Igor.
>
>

Depends on the weight of the boat and the purpose. I have a rather
heavy Campion 18ft hardtop with a 120hp I/O and it suits me fine. I've
never pulled a skier, but I suspect it would have no problems.

   OTOH, a V6 would be nice - a bit more power, and it's a bit more
compact than the I4 so you'd have a smidgen more cockpit space.

Lloyd Sumpter
"Valkyrie" Campion 18 - http://members.shaw.ca/lsumpter/Campion

On Wed, 01 Jan 2003 03:33:56 -0800, bowgus wrote:

> About the I/O ... I was advised go Mercruiser. And with an 18'
> fiberglass I would suggest minimum 185 hp (which is what I have). So
> that would be a 6 cyl and alpha outdrive. If you go bigger hp look into
> bravo outdrive and so on ... suggest browse the Mercruiser site for info
> on that. I see new 18' boats at the shows with 130 hp I/O ... can that
> hp even achieve plane with 4 adults aboard ??? I would guess my 18' 185
> hp would require the 19" prop to pull skiers or carry 4 adults... the
> 21" is ok for me, 1 passenger and our gear ... but barely ... I can
> reach 4600 rpm, the engine is rated 4800 rpm ... a 20" prop would be
> best for engine loading and so on. However we cruise typically at 30 mph
> at 3000 rpm ... or slower say just looking around at 1000 rpm. To sum up
> ... form my experience suggest a 6 cyl minimum ... at least 185 hp ...
> carburated or fuel injection your personal choice.
> 
> Igor <igor.skubitsky@rogers.com> wrote in message
> news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
>> Hello !
>>
>> I am shopping for 18" boat with I/O and have currently number of
>> manufacturers to go with:
>>
>> SeaRay
>> Stingray
>> Rinker
>> Regal
>> Maxum
>>
>> What I was wondering is which manufacturer will hold the value better
>> and which one is better build quality. I've done quite a bit of
>> research but
> did
>> not find anything on the quality/value factor. I am basically looking
>> for all-purpose bowrider - fishing, skying and a bit of performance.
>>
>> Help is greatly appreciated,
>> Igor.
>>
>>
>>

If you look at the Maxim, check out the Campions as well - also built
in Vernon. The local "party lake" (Cultus) is almost all Maxims and
Campions.

http://www.campionboats.com

Lloyd Sumpter
"Valkyrie" Campion 18


On Tue, 31 Dec 2002 08:48:56 -0800, Garry wrote:

> I would highly recommend looking at Malibu boats out of Vernon BC .The
> boats you listed will do the job but are mass produced .Malibus are hand
> made and heavier.Check out there website but don't be fooled by malibu
> boats out of California.Different manufacture good luck.. "Igor"
> <igor.skubitsky@rogers.com> wrote in message
> news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
>> Hello !
>>
>> I am shopping for 18" boat with I/O and have currently number of
>> manufacturers to go with:
>>
>> SeaRay
>> Stingray
>> Rinker
>> Regal
>> Maxum
>>
>> What I was wondering is which manufacturer will hold the value better
>> and which one is better build quality. I've done quite a bit of
>> research but
> did
>> not find anything on the quality/value factor. I am basically looking
>> for all-purpose bowrider - fishing, skying and a bit of performance.
>>
>> Help is greatly appreciated,
>> Igor.
>>
>>
>>

Yes, I am in T.O. and planning to buy the boat on the boatshow but I needed
some feedback on the manufacturers so will not be fooled by salespeople.

Thanks,
Igor.

"Greg Moore" <gdm@sympatico.ca> wrote in message
news:dKqQ9.2191$8n5.566911@news20.bellglobal.com...
> Manufacturer still does make a difference!  Take Bayliners (PLEASE,
> kidding).  Their bad rap comes from the fact they are a cheap boat, but
they
> are also cheap to buy and as long as you don't expect a used one to sell
for
> the same as a used SeaRay..
>
> My preference from that list is Regal, I traded an 85 28' Regal in on a
21'
> 2000 Regal cuddy.  High tech hull does great speed for given power, has no
> issues running Lake Hurons hissy fits and carries a life time hull
warranty.
> Other things to keep in mind is a small handfull of manufacturers have ISO
> 9001 certification (like Regal) and ISO isn't a crock, it really doesn
take
> quality and consistancy to get it.  IMO, Searay is still an excellent boat
> but has slipped down the ladder a bit, in the late 80's early 90's they
were
> one of the only sensible used choices, now they are still good, but just
> good.  Rinker's (too me) are a little behind on the latest styles and
> building techniques, leave me the impression of a utility or fish only
boat.
> Stingray has some nice boats, but has had some past weaknesses that may
make
> it harder to sell later.  Maxum appears to make a very nice boat, but I
have
> never been in one to see how it handles etc..
>
> Decide first, what are you going to use it for, fishing mostly, pulling
kids
> on toys, taking friends for pleasant cruises, getting from A to B etc etc.
> Will it be trailered a lot or just a couple of times a season.  Do you
want
> speed, or space, or low cost, or top looks..  No 2 18 footers will be the
> same size, a Wilker 18' is a huge 18' (and a bit of a barge, but
sensational
> fishing boat), a Glastron type 18' does well to hold 4 people but is very
> fast.  A Regal 18' looks very modern (too much so for some) and a SeaRay
18'
> looks very 'classic'.
>
> From your e-address I assume you may be near T.O...  If so, do not miss
the
> Toronto Int Boat Show in about 2 weeks, almost every breed of 18 will be
> there.
>
> Greg Moore
>
> "Igor" <igor.skubitsky@rogers.com> wrote in message
> news:_xnQ9.133403$F2h1.112936@news01.bloor.is.net.cable.rogers.com...
> > Thanks for your feedback. From what I can see manufacturer does not make
a
> > difference as soon as it is known to the public. It is personal
preference
> > and I guess I will buy the one where I feel comfortable and like the
look.
> >
> > Thanks again and Happy New Year to everyone !
> >
> > "Igor" <igor.skubitsky@rogers.com> wrote in message
> > news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> > > Hello !
> > >
> > > I am shopping for 18" boat with I/O and have currently number of
> > > manufacturers to go with:
> > >
> > > SeaRay
> > > Stingray
> > > Rinker
> > > Regal
> > > Maxum
> > >
> > > What I was wondering is which manufacturer will hold the value better
> and
> > > which one is better build quality. I've done quite a bit of research
but
> > did
> > > not find anything on the quality/value factor. I am basically looking
> for
> > > all-purpose bowrider - fishing, skying and a bit of performance.
> > >
> > > Help is greatly appreciated,
> > > Igor.
> > >
> > >
> >
> >
>
>

Why Mercruiser ? I heard Volvo is more advanced technology and you are
getting Bravo I like drive instead of Alpha in the base configuration.

Igor.

"bowgus" <Bowgus@rogers.com> wrote in message
news:EmAQ9.116095$yW.70003@news04.bloor.is.net.cable.rogers.com...
> About the I/O ... I was advised go Mercruiser. And with an 18' fiberglass
I
> would suggest minimum 185 hp (which is what I have). So that would be a 6
> cyl and alpha outdrive. If you go bigger hp look into bravo outdrive and
so
> on ... suggest browse the Mercruiser site for info on that. I see new 18'
> boats at the shows with 130 hp I/O ... can that hp even achieve plane with
4
> adults aboard ??? I would guess my 18' 185 hp would require the 19" prop
to
> pull skiers or carry 4 adults... the 21" is ok for me, 1 passenger and our
> gear ... but barely ... I can reach 4600 rpm, the engine is rated 4800 rpm
> ... a 20" prop would be best for engine loading and so on. However we
cruise
> typically at 30 mph at 3000 rpm ... or slower say just looking around at
> 1000 rpm. To sum up ... form my experience suggest a 6 cyl minimum ... at
> least 185 hp ... carburated or fuel injection your personal choice.
>
> Igor <igor.skubitsky@rogers.com> wrote in message
> news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> > Hello !
> >
> > I am shopping for 18" boat with I/O and have currently number of
> > manufacturers to go with:
> >
> > SeaRay
> > Stingray
> > Rinker
> > Regal
> > Maxum
> >
> > What I was wondering is which manufacturer will hold the value better
and
> > which one is better build quality. I've done quite a bit of research but
> did
> > not find anything on the quality/value factor. I am basically looking
for
> > all-purpose bowrider - fishing, skying and a bit of performance.
> >
> > Help is greatly appreciated,
> > Igor.
> >
> >
>
>

Igor ... mine's an older setup ... 1983 ... that may be why Mercruiser was
recommended. But from what you've said about your requirements, I strongly
recommend a V6 minimum. If you're considering a 4 cyl, I strongly suggest
you try before you buy ... preferably with 4 adults aboard. I may typically
run at about 90-120 hp at 2400-3000 rpm, but I'm up on plane with 4 in the
boat quick enough for me. And if I get the urge to hurry it's 50 mph ... not
that fast by todays standards, but fast enough to smooth out the ride on
inland lakes and rivers on choppy days. You're in T.O.? If you're going out
on Lake Ontario or the St Lawrence very often you need a bigger boat to be
comfortable. I usually have to throttle my little 18 footer right back when
out that way. I'll let others recommend a suitable size boat for those
waters. Just passing on my personal experience by the way ... I'm not one to
pass judgement ... if it feels good, do it :-)

Igor <igor.skubitsky@rogers.com> wrote in message
news:yzJQ9.120029$E_.85665@news02.bloor.is.net.cable.rogers.com...
> Why Mercruiser ? I heard Volvo is more advanced technology and you are
> getting Bravo I like drive instead of Alpha in the base configuration.
>
> Igor.
>
> "bowgus" <Bowgus@rogers.com> wrote in message
> news:EmAQ9.116095$yW.70003@news04.bloor.is.net.cable.rogers.com...
> > About the I/O ... I was advised go Mercruiser. And with an 18'
fiberglass
> I
> > would suggest minimum 185 hp (which is what I have). So that would be a
6
> > cyl and alpha outdrive. If you go bigger hp look into bravo outdrive and
> so
> > on ... suggest browse the Mercruiser site for info on that. I see new
18'
> > boats at the shows with 130 hp I/O ... can that hp even achieve plane
with
> 4
> > adults aboard ??? I would guess my 18' 185 hp would require the 19" prop
> to
> > pull skiers or carry 4 adults... the 21" is ok for me, 1 passenger and
our
> > gear ... but barely ... I can reach 4600 rpm, the engine is rated 4800
rpm
> > ... a 20" prop would be best for engine loading and so on. However we
> cruise
> > typically at 30 mph at 3000 rpm ... or slower say just looking around at
> > 1000 rpm. To sum up ... form my experience suggest a 6 cyl minimum ...
at
> > least 185 hp ... carburated or fuel injection your personal choice.
> >
> > Igor <igor.skubitsky@rogers.com> wrote in message
> > news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> > > Hello !
> > >
> > > I am shopping for 18" boat with I/O and have currently number of
> > > manufacturers to go with:
> > >
> > > SeaRay
> > > Stingray
> > > Rinker
> > > Regal
> > > Maxum
> > >
> > > What I was wondering is which manufacturer will hold the value better
> and
> > > which one is better build quality. I've done quite a bit of research
but
> > did
> > > not find anything on the quality/value factor. I am basically looking
> for
> > > all-purpose bowrider - fishing, skying and a bit of performance.
> > >
> > > Help is greatly appreciated,
> > > Igor.
> > >
> > >
> >
> >
>
>

Nice pics Loyd ... looks very much like my 18' 6" :-) KMV Oliver ... I think
the Oliver's a bit deeper ... and therefore a bit heavier. I'll send a pic
if you're interested.

Lloyd Sumpter <lsumpter@shaw.ca> wrote in message
news:pan.2003.01.01.18.24.47.151442.26753@shaw.ca...
> Depends on the weight of the boat and the purpose. I have a rather
> heavy Campion 18ft hardtop with a 120hp I/O and it suits me fine. I've
> never pulled a skier, but I suspect it would have no problems.
>
>    OTOH, a V6 would be nice - a bit more power, and it's a bit more
> compact than the I4 so you'd have a smidgen more cockpit space.
>
> Lloyd Sumpter
> "Valkyrie" Campion 18 - http://members.shaw.ca/lsumpter/Campion
>
> On Wed, 01 Jan 2003 03:33:56 -0800, bowgus wrote:
>
> > About the I/O ... I was advised go Mercruiser. And with an 18'
> > fiberglass I would suggest minimum 185 hp (which is what I have). So
> > that would be a 6 cyl and alpha outdrive. If you go bigger hp look into
> > bravo outdrive and so on ... suggest browse the Mercruiser site for info
> > on that. I see new 18' boats at the shows with 130 hp I/O ... can that
> > hp even achieve plane with 4 adults aboard ??? I would guess my 18' 185
> > hp would require the 19" prop to pull skiers or carry 4 adults... the
> > 21" is ok for me, 1 passenger and our gear ... but barely ... I can
> > reach 4600 rpm, the engine is rated 4800 rpm ... a 20" prop would be
> > best for engine loading and so on. However we cruise typically at 30 mph
> > at 3000 rpm ... or slower say just looking around at 1000 rpm. To sum up
> > ... form my experience suggest a 6 cyl minimum ... at least 185 hp ...
> > carburated or fuel injection your personal choice.
> >
> > Igor <igor.skubitsky@rogers.com> wrote in message
> > news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> >> Hello !
> >>
> >> I am shopping for 18" boat with I/O and have currently number of
> >> manufacturers to go with:
> >>
> >> SeaRay
> >> Stingray
> >> Rinker
> >> Regal
> >> Maxum
> >>
> >> What I was wondering is which manufacturer will hold the value better
> >> and which one is better build quality. I've done quite a bit of
> >> research but
> > did
> >> not find anything on the quality/value factor. I am basically looking
> >> for all-purpose bowrider - fishing, skying and a bit of performance.
> >>
> >> Help is greatly appreciated,
> >> Igor.
> >>
> >>
> >>

I bought new 2000 17ft Larson 3.0 merqcruiser and my friend has the same
boat only the 18 ft.
We use ours a lot to ski and go out in Lake Ontario. I am set up for speed
on the big lake but will get a lower pitch 4 blade prop for better hole
shots on smaller lakes sking since I should have a spare prop, why not have
one of each .
I would say you should see about the Larson boats before you buy. We liked
the Maxum / SeaRay but found the larson on par with fit and looks but a
better deal. Not sure where you are but Martin at Bobcaygeon Marine gave us
a good deal and will be at the Toronto boat show.



"Igor" <igor.skubitsky@rogers.com> wrote in message
news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> Hello !
>
> I am shopping for 18" boat with I/O and have currently number of
> manufacturers to go with:
>
> SeaRay
> Stingray
> Rinker
> Regal
> Maxum
>
> What I was wondering is which manufacturer will hold the value better and
> which one is better build quality. I've done quite a bit of research but
did
> not find anything on the quality/value factor. I am basically looking for
> all-purpose bowrider - fishing, skying and a bit of performance.
>
> Help is greatly appreciated,
> Igor.
>
>

"Igor" <igor.skubitsky@rogers.com> wrote in message
news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> Hello !
>
> I am shopping for 18" boat with I/O and have currently number of
> manufacturers to go with:
>
> SeaRay
> Stingray
> Rinker
> Regal
> Maxum
>
> What I was wondering is which manufacturer will hold the value better and
> which one is better build quality. I've done quite a bit of research but
did
> not find anything on the quality/value factor. I am basically looking for
> all-purpose bowrider - fishing, skying and a bit of performance.
>
> Help is greatly appreciated,
> Igor.
>
>
  I'm selling my 19 ft Larson, its got a brand new motor with less then 10
hrs on her, comes with all fishing toys, and I think it would be a great
boat for  water skiing, but have never done it so don't know for sure, the
motor that i had in it before seemed to be too small for the size of the
boat so i got the 4cyl taken out and put a 350 Merc in her and now she
 she hums if your interested and live in Ontario e-mail me and will give you
all details  windzor@efni.com thanks

I suggest you look at a couple of BC builders.Champion and Malibu.If you do
a Internet search  make sure you get the Canadian not American
malibus.Malibus are made in vernon and champion in kelowna I believe?.They
both make very good boats.Good  boating.
"joe" <windzor@efni.com> wrote in message
news:vairgjbj03n392@corp.supernews.com...
>
> "Igor" <igor.skubitsky@rogers.com> wrote in message
> news:fS7Q9.124545$F2h1.24508@news01.bloor.is.net.cable.rogers.com...
> > Hello !
> >
> > I am shopping for 18" boat with I/O and have currently number of
> > manufacturers to go with:
> >
> > SeaRay
> > Stingray
> > Rinker
> > Regal
> > Maxum
> >
> > What I was wondering is which manufacturer will hold the value better
and
> > which one is better build quality. I've done quite a bit of research but
> did
> > not find anything on the quality/value factor. I am basically looking
for
> > all-purpose bowrider - fishing, skying and a bit of performance.
> >
> > Help is greatly appreciated,
> > Igor.
> >
> >
>   I'm selling my 19 ft Larson, its got a brand new motor with less then 10
> hrs on her, comes with all fishing toys, and I think it would be a great
> boat for  water skiing, but have never done it so don't know for sure, the
> motor that i had in it before seemed to be too small for the size of the
> boat so i got the 4cyl taken out and put a 350 Merc in her and now she
>  she hums if your interested and live in Ontario e-mail me and will give
you
> all details  windzor@efni.com thanks
>
>