Article View: rec.juggling
Article #822Re: How to do Mills Mess
From: Philip Nason Burt
Date: Sun, 20 Dec 1992 19:21
Date: Sun, 20 Dec 1992 19:21
20 lines
1106 bytes
1106 bytes
In article <1992Dec20.132318.2216@ohm.york.ac.uk> jkn@ohm.york.ac.uk (John Nicoll) writes: [everything deleted] >-- >john nicoll (jkn@ohm.york.ac.uk) >Department of Electronics University of York >Heslington YORK YO1 5DD U.K >Tel +44 (904) 433221 Fax +44 (904) 432335 excelent instructions john. for anyone trying to learn mills, this is the most effective way of learning and john has described the motion very accurately. to add the third ball, hold it in the crossed hand that is on top. before you catch the second thrown ball, toss the third ball straight up. things should fall in place once you get the two balls down. later, phil
Technical Details
Message-ID:
<m9q24#p@rpi.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!caen!zaphod.mps.ohio-state.edu!rpi!burtpReferences:
<1992Dec17.021051.16912@csc.canberra.edu.au> <1992Dec20.132318.2216@ohm.york.ac.uk>Show Full Headers
Complete Article Headers
Newsgroups: rec.juggling Path: arc1-ca.pugleaf.net!sparky!uunet!caen!zaphod.mps.ohio-state.edu!rpi!burtp From: burtp@aix.rpi.edu (Philip Nason Burt) Subject: Re: How to do Mills Mess Message-ID: <m9q24#p@rpi.edu> Nntp-Posting-Host: aix.rpi.edu Organization: Rensselaer Polytechnic Institute, Troy, NY References: <1992Dec17.021051.16912@csc.canberra.edu.au> <1992Dec20.132318.2216@ohm.york.ac.uk> Date: Sun, 20 Dec 1992 19:21:13 GMT Lines: 21