WTB: NHP Blades

Thread View: rec.models.rc.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by David Mantel Wed, 12 Feb 1997 00:00

Author: David Mantel
Date: Wed, 12 Feb 1997 00:00

22 lines
1897 bytes

Wanted; NHP Swept Tip Blades 680mm

I'm looking for a good set of NHP Turbulator style carbon blades in the
680mm length. These are the ones that have the white vinyl covering on
the top surface starting at 3/8 inch back from the leading edge and a
very curved tip (as compared with the Curtis 680 blades with the blunt
tip). These blades will be a back-up set for a helicopter that is being
built to set a world speed record. IMHO the turbulator blades have flying
characteristics that make them unsuited for today's sport or 3-D pilot
but for certain high speed use they are excellent.

NHP has no more of these blades in stock nor do they intend to produce
them in the future. I need your help to find a set.

E-mail your sales price to <smprc@juno.com> not to the address in the
mail header.

Thanks,
Steve Poretz
Maryland Helicopter Association
smprc@juno.com

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads