Micro servos and Tower Hobbies address...

Article View: rec.models.rc

Article #1813

#1813

From: Chris Kaiser
Date: Mon, 04 Jan 1993 02:44

20 lines
1217 bytes

I'm currently building a model that requires a micro servo in each
V-tail surface. The smallest available here is the Futaba 143 (same
as the 133 I think) which is about 13mm thick. However this is a bit
too thick, so could anyone tell me if there are any smaller servos
out there. I think Airtronics make a small one, I've also heard of
one called the "Union 12gm", and also a super micro Kyosho one.
Does anyone have any info on these servos?

The second problem is obtaining them. I've been told Tower is a
good place to try, so could someone please email me their address
so I can order a catalog.

Thanks for any replies.

Chris Kaiser

Postgrad, Elec. Eng. Dept.
University of Canterbury
Christchurch, NEW ZEALAND

Technical Details

Message-ID: <C0B6A1.717@cantua.canterbury.ac.nz>

Path:

arc1-ca.pugleaf.net!sparky!uunet!paladin.american.edu!howland.reston.ans.net!usc!wupost!waikato.ac.nz!canterbury.ac.nz!betelgeux!kaiser

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!paladin.american.edu!howland.reston.ans.net!usc!wupost!waikato.ac.nz!canterbury.ac.nz!betelgeux!kaiser
Newsgroups: rec.models.rc
Subject: Micro servos and Tower Hobbies address...
Message-ID: <C0B6A1.717@cantua.canterbury.ac.nz>
From: kaiser@elec.canterbury.ac.nz (Chris Kaiser)
Date: Mon, 4 Jan 1993 02:44:25 GMT
Organization: Electrical Engineering, University of Canterbury, New Zealand
Nntp-Posting-Host: betelgeux.canterbury.ac.nz
Lines: 24