Article View: rec.models.rc
Article #1864Re: Connecting pushrods to servos
From: Larry E. Snyder
Date: Fri, 22 Jan 1993 13:47
Date: Fri, 22 Jan 1993 13:47
14 lines
945 bytes
945 bytes
In article <C189q0.F7M@csn.org>, eeak@teal.csn.org (Ed Krejcik) writes: > > > QUESTION: > Can I use the EZ connectors, or will they fail due to vibration? > They are my first choice. > I would NOT recommend using EZ connectors on anything but throttle. If that little setscrew gets even a little loose on the elevator, you'r dead meat. Just not worth it. I don't see where soldering quick links to the pushrod would be any better than Z-bends. Solder joints can fail, but Z-bends are rock solid. I vote for Z-bends. Larry
Technical Details
Message-ID:
<1993Jan22.134748.17215@tin.monsanto.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!wupost!monsanto.com!lesnyd@monsanto.comReferences:
<C189q0.F7M@csn.org>Show Full Headers
Complete Article Headers
Newsgroups: rec.models.rc Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!monsanto.com!lesnyd@monsanto.com From: lesnyd@monsanto.com (Larry E. Snyder) Subject: Re: Connecting pushrods to servos Message-ID: <1993Jan22.134748.17215@tin.monsanto.com> Sender: news@tin.monsanto.com (USENET News System) Organization: DSC References: <C189q0.F7M@csn.org> Distribution: usa Date: Fri, 22 Jan 1993 13:47:48 GMT Lines: 14